stm32h735/stm32h735g-dk/Drivers/CMSIS/Device/ST/STM32H7xx/Include/stm32h7xx.h File Reference

CMSIS STM32H7xx Device Peripheral Access Layer Header File. More...

Go to the source code of this file.

Macros
#define	__STM32H7xx_CMSIS_DEVICE_VERSION
#define	__STM32H7xx_CMSIS_DEVICE_VERSION_MAIN   (0x01)
	Comment the line below if you will not use the peripherals drivers. In this case, these drivers will not be included and the application code will be based on direct access to peripherals registers. More...
#define	__STM32H7xx_CMSIS_DEVICE_VERSION_RC   (0x00)
#define	__STM32H7xx_CMSIS_DEVICE_VERSION_SUB1   (0x0A)
#define	__STM32H7xx_CMSIS_DEVICE_VERSION_SUB2   (0x00)
#define	CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))
#define	CLEAR_REG(REG)   ((REG) = (0x0))
#define	IS_FUNCTIONAL_STATE(STATE)   (((STATE) == DISABLE) || ((STATE) == ENABLE))
#define	MODIFY_REG(REG, CLEARMASK, SETMASK)   WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
#define	POSITION_VAL(VAL)   (__CLZ(__RBIT(VAL)))
#define	READ_BIT(REG, BIT)   ((REG) & (BIT))
#define	READ_REG(REG)   ((REG))
#define	SET_BIT(REG, BIT)   ((REG) |= (BIT))
#define	STM32H7
	STM32 Family. More...
#define	WRITE_REG(REG, VAL)   ((REG) = (VAL))

Typedefs
typedef enum FlagStatus	ITStatus

Enumerations
enum	ErrorStatus {   SUCCESS = 0U, ERROR = !SUCCESS, SUCCESS = 0U, ERROR = !SUCCESS,   SUCCESS = 0U, ERROR = !SUCCESS, SUCCESS = 0U, ERROR = !SUCCESS,   SUCCESS = 0, ERROR = !SUCCESS, SUCCESS = 0, ERROR = !SUCCESS }
enum	FlagStatus {   RESET = 0U, SET = !RESET, RESET = 0U, SET = !RESET,   RESET = 0U, SET = !RESET, RESET = 0U, SET = !RESET,   RESET = 0, SET = !RESET, RESET = 0, SET = !RESET }
enum	FunctionalState {   DISABLE = 0U, ENABLE = !DISABLE, DISABLE = 0U, ENABLE = !DISABLE,   DISABLE = 0U, ENABLE = !DISABLE, DISABLE = 0U, ENABLE = !DISABLE,   DISABLE = 0, ENABLE = !DISABLE, DISABLE = 0, ENABLE = !DISABLE }

Detailed Description

CMSIS STM32H7xx Device Peripheral Access Layer Header File.

Author

MCD Application Team

     The file is the unique include file that the application programmer
     is using in the C source code, usually in main.c. This file contains:
      - Configuration section that allows to select:
         - The STM32H7xx device used in the target application
         - To use or not the peripheral’s drivers in application code(i.e.
           code will be based on direct access to peripheral’s registers
           rather than drivers API), this option is controlled by
           "#define USE_HAL_DRIVER"

Attention

© Copyright (c) 2017 STMicroelectronics. All rights reserved.

This software component is licensed by ST under BSD 3-Clause license, the "License"; You may not use this file except in compliance with the License. You may obtain a copy of the License at: opensource.org/licenses/BSD-3-Clause

Definition in file stm32h735/stm32h735g-dk/Drivers/CMSIS/Device/ST/STM32H7xx/Include/stm32h7xx.h.