Classes | Macros | Typedefs | Enumerations | Functions
stm32f7xx_hal_uart.h File Reference

Header file of UART HAL module. More...

#include "stm32f7xx_hal_def.h"
#include "stm32f7xx_hal_uart_ex.h"
Include dependency graph for stm32f7xx_hal_uart.h:
This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Classes

struct  __UART_HandleTypeDef
 UART handle Structure definition. More...
 
struct  UART_AdvFeatureInitTypeDef
 UART Advanced Features initialization structure definition. More...
 
struct  UART_InitTypeDef
 UART Init Structure definition. More...
 

Macros

#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__)   __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_FEF)
 Clear the UART FE pending flag. More...
 
#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__)   ((__HANDLE__)->Instance->ICR = (__FLAG__))
 Clear the specified UART pending flag. More...
 
#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__)   __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_IDLEF)
 Clear the UART IDLE pending flag. More...
 
#define __HAL_UART_CLEAR_IT(__HANDLE__, __IT_CLEAR__)   ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__))
 Clear the specified UART ISR flag, in setting the proper ICR register flag. More...
 
#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__)   __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_NEF)
 Clear the UART NE pending flag. More...
 
#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__)   __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_OREF)
 Clear the UART ORE pending flag. More...
 
#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__)   __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_PEF)
 Clear the UART PE pending flag. More...
 
#define __HAL_UART_DISABLE(__HANDLE__)   ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
 Disable UART. More...
 
#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__)
 Disable the specified UART interrupt. More...
 
#define __HAL_UART_ENABLE(__HANDLE__)   ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
 Enable UART. More...
 
#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__)
 Enable the specified UART interrupt. More...
 
#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__)
 Flush the UART Data registers. More...
 
#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__)   (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
 Check whether the specified UART flag is set or not. More...
 
#define __HAL_UART_GET_IT(__HANDLE__, __INTERRUPT__)
 Check whether the specified UART interrupt has occurred or not. More...
 
#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)
 Check whether the specified UART interrupt source is enabled or not. More...
 
#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__)
 Disable CTS flow control. More...
 
#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__)
 Enable CTS flow control. More...
 
#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__)
 Disable RTS flow control. More...
 
#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__)
 Enable RTS flow control. More...
 
#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__)   ((__HANDLE__)->Instance->CR3 &= ~USART_CR3_ONEBIT)
 Disable the UART one bit sample method. More...
 
#define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__)   ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
 Enable the UART one bit sample method. More...
 
#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__)
 Reset UART handle states. More...
 
#define __HAL_UART_SEND_REQ(__HANDLE__, __REQ__)   ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__))
 Set a specific UART request flag. More...
 
#define HAL_UART_ERROR_DMA   ((uint32_t)0x00000010U)
 
#define HAL_UART_ERROR_FE   ((uint32_t)0x00000004U)
 
#define HAL_UART_ERROR_NE   ((uint32_t)0x00000002U)
 
#define HAL_UART_ERROR_NONE   ((uint32_t)0x00000000U)
 
#define HAL_UART_ERROR_ORE   ((uint32_t)0x00000008U)
 
#define HAL_UART_ERROR_PE   ((uint32_t)0x00000001U)
 
#define HAL_UART_ERROR_RTO   ((uint32_t)0x00000020U)
 
#define HAL_UART_STATE_BUSY   0x00000024U
 
#define HAL_UART_STATE_BUSY_RX   0x00000022U
 
#define HAL_UART_STATE_BUSY_TX   0x00000021U
 
#define HAL_UART_STATE_BUSY_TX_RX   0x00000023U
 
#define HAL_UART_STATE_ERROR   0x000000E0U
 
#define HAL_UART_STATE_READY   0x00000020U
 
#define HAL_UART_STATE_RESET   0x00000000U
 
#define HAL_UART_STATE_TIMEOUT   0x000000A0U
 
#define HAL_UART_TIMEOUT_VALUE   0x1FFFFFFU
 
#define IS_UART_ADVFEATURE_AUTOBAUDRATE(__AUTOBAUDRATE__)
 Ensure that UART auto Baud rate state is valid. More...
 
#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(__MODE__)
 Ensure that UART auto Baud rate detection mode is valid. More...
 
#define IS_UART_ADVFEATURE_DATAINV(__DATAINV__)
 Ensure that UART frame data inversion setting is valid. More...
 
#define IS_UART_ADVFEATURE_DMAONRXERROR(__DMA__)
 Ensure that UART DMA enabling or disabling on error setting is valid. More...
 
#define IS_UART_ADVFEATURE_INIT(__INIT__)
 Ensure that UART advanced features initialization is valid. More...
 
#define IS_UART_ADVFEATURE_MSBFIRST(__MSBFIRST__)
 Ensure that UART frame MSB first setting is valid. More...
 
#define IS_UART_ADVFEATURE_RXINV(__RXINV__)
 Ensure that UART frame RX inversion setting is valid. More...
 
#define IS_UART_ADVFEATURE_SWAP(__SWAP__)
 Ensure that UART frame RX/TX pins swap setting is valid. More...
 
#define IS_UART_ADVFEATURE_TXINV(__TXINV__)
 Ensure that UART frame TX inversion setting is valid. More...
 
#define IS_UART_ASSERTIONTIME(__TIME__)   ((__TIME__) <= 0x1FU)
 Check UART assertion time. More...
 
#define IS_UART_BAUDRATE(__BAUDRATE__)   ((__BAUDRATE__) < 27000001U)
 Check UART Baud rate. More...
 
#define IS_UART_DE_POLARITY(__POLARITY__)
 Ensure that UART driver enable polarity is valid. More...
 
#define IS_UART_DEASSERTIONTIME(__TIME__)   ((__TIME__) <= 0x1FU)
 Check UART deassertion time. More...
 
#define IS_UART_DMA_RX(__DMARX__)
 Ensure that UART DMA RX state is valid. More...
 
#define IS_UART_DMA_TX(__DMATX__)
 Ensure that UART DMA TX state is valid. More...
 
#define IS_UART_HALF_DUPLEX(__HDSEL__)
 Ensure that UART half-duplex state is valid. More...
 
#define IS_UART_HARDWARE_FLOW_CONTROL(__CONTROL__)
 Ensure that UART hardware flow control is valid. More...
 
#define IS_UART_LIN(__LIN__)
 Ensure that UART LIN state is valid. More...
 
#define IS_UART_LIN_BREAK_DETECT_LENGTH(__LENGTH__)
 Ensure that UART LIN break detection length is valid. More...
 
#define IS_UART_MODE(__MODE__)   ((((__MODE__) & (~((uint32_t)(UART_MODE_TX_RX)))) == 0x00U) && ((__MODE__) != 0x00U))
 Ensure that UART communication mode is valid. More...
 
#define IS_UART_MUTE_MODE(__MUTE__)
 Ensure that UART mute mode state is valid. More...
 
#define IS_UART_ONE_BIT_SAMPLE(__ONEBIT__)
 Ensure that UART frame sampling is valid. More...
 
#define IS_UART_OVERRUN(__OVERRUN__)
 Ensure that UART frame overrun setting is valid. More...
 
#define IS_UART_OVERSAMPLING(__SAMPLING__)
 Ensure that UART oversampling is valid. More...
 
#define IS_UART_PARITY(__PARITY__)
 Ensure that UART frame parity is valid. More...
 
#define IS_UART_RECEIVER_TIMEOUT(__TIMEOUT__)
 Ensure that UART receiver timeout setting is valid. More...
 
#define IS_UART_RECEIVER_TIMEOUT_VALUE(__TIMEOUTVALUE__)   ((__TIMEOUTVALUE__) <= 0xFFFFFFU)
 Check the receiver timeout value. More...
 
#define IS_UART_REQUEST_PARAMETER(__PARAM__)
 Ensure that UART request parameter is valid. More...
 
#define IS_UART_STATE(__STATE__)
 Ensure that UART state is valid. More...
 
#define IS_UART_STOPBITS(__STOPBITS__)
 Ensure that UART frame number of stop bits is valid. More...
 
#define IS_UART_WAKEUPMETHOD(__WAKEUP__)
 Ensure that UART wake-up method is valid. More...
 
#define UART_ADVFEATURE_AUTOBAUDRATE_DISABLE   0x00000000U
 
#define UART_ADVFEATURE_AUTOBAUDRATE_ENABLE   USART_CR2_ABREN
 
#define UART_ADVFEATURE_AUTOBAUDRATE_INIT   0x00000040U
 
#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME   USART_CR2_ABRMODE
 
#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME   USART_CR2_ABRMODE_1
 
#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE   USART_CR2_ABRMODE_0
 
#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT   0x00000000U
 
#define UART_ADVFEATURE_DATAINV_DISABLE   0x00000000U
 
#define UART_ADVFEATURE_DATAINV_ENABLE   USART_CR2_DATAINV
 
#define UART_ADVFEATURE_DATAINVERT_INIT   0x00000004U
 
#define UART_ADVFEATURE_DMA_DISABLEONRXERROR   USART_CR3_DDRE
 
#define UART_ADVFEATURE_DMA_ENABLEONRXERROR   0x00000000U
 
#define UART_ADVFEATURE_DMADISABLEONERROR_INIT   0x00000020U
 
#define UART_ADVFEATURE_MSBFIRST_DISABLE   0x00000000U
 
#define UART_ADVFEATURE_MSBFIRST_ENABLE   USART_CR2_MSBFIRST
 
#define UART_ADVFEATURE_MSBFIRST_INIT   0x00000080U
 
#define UART_ADVFEATURE_MUTEMODE_DISABLE   0x00000000U
 
#define UART_ADVFEATURE_MUTEMODE_ENABLE   USART_CR1_MME
 
#define UART_ADVFEATURE_NO_INIT   0x00000000U
 
#define UART_ADVFEATURE_OVERRUN_DISABLE   USART_CR3_OVRDIS
 
#define UART_ADVFEATURE_OVERRUN_ENABLE   0x00000000U
 
#define UART_ADVFEATURE_RXINV_DISABLE   0x00000000U
 
#define UART_ADVFEATURE_RXINV_ENABLE   USART_CR2_RXINV
 
#define UART_ADVFEATURE_RXINVERT_INIT   0x00000002U
 
#define UART_ADVFEATURE_RXOVERRUNDISABLE_INIT   0x00000010U
 
#define UART_ADVFEATURE_SWAP_DISABLE   0x00000000U
 
#define UART_ADVFEATURE_SWAP_ENABLE   USART_CR2_SWAP
 
#define UART_ADVFEATURE_SWAP_INIT   0x00000008U
 
#define UART_ADVFEATURE_TXINV_DISABLE   0x00000000U
 
#define UART_ADVFEATURE_TXINV_ENABLE   USART_CR2_TXINV
 
#define UART_ADVFEATURE_TXINVERT_INIT   0x00000001U
 
#define UART_AUTOBAUD_REQUEST   USART_RQR_ABRRQ
 
#define UART_CLEAR_CMF   USART_ICR_CMCF
 
#define UART_CLEAR_CTSF   USART_ICR_CTSCF
 
#define UART_CLEAR_FEF   USART_ICR_FECF
 
#define UART_CLEAR_IDLEF   USART_ICR_IDLECF
 
#define UART_CLEAR_LBDF   USART_ICR_LBDCF
 
#define UART_CLEAR_NEF   USART_ICR_NCF
 
#define UART_CLEAR_OREF   USART_ICR_ORECF
 
#define UART_CLEAR_PEF   USART_ICR_PECF
 
#define UART_CLEAR_RTOF   USART_ICR_RTOCF
 
#define UART_CLEAR_TCF   USART_ICR_TCCF
 
#define UART_CR1_DEAT_ADDRESS_LSB_POS   21U
 
#define UART_CR1_DEDT_ADDRESS_LSB_POS   16U
 
#define UART_CR2_ADDRESS_LSB_POS   24U
 
#define UART_DE_POLARITY_HIGH   0x00000000U
 
#define UART_DE_POLARITY_LOW   USART_CR3_DEP
 
#define UART_DIV_SAMPLING16(__PCLK__, __BAUD__)   (((__PCLK__) + ((__BAUD__)/2U)) / (__BAUD__))
 BRR division operation to set BRR register in 16-bit oversampling mode. More...
 
#define UART_DIV_SAMPLING8(__PCLK__, __BAUD__)   ((((__PCLK__)*2U) + ((__BAUD__)/2U)) / (__BAUD__))
 BRR division operation to set BRR register in 8-bit oversampling mode. More...
 
#define UART_DMA_RX_DISABLE   0x00000000U
 
#define UART_DMA_RX_ENABLE   USART_CR3_DMAR
 
#define UART_DMA_TX_DISABLE   0x00000000U
 
#define UART_DMA_TX_ENABLE   USART_CR3_DMAT
 
#define UART_FLAG_ABRE   USART_ISR_ABRE
 
#define UART_FLAG_ABRF   USART_ISR_ABRF
 
#define UART_FLAG_BUSY   USART_ISR_BUSY
 
#define UART_FLAG_CMF   USART_ISR_CMF
 
#define UART_FLAG_CTS   USART_ISR_CTS
 
#define UART_FLAG_CTSIF   USART_ISR_CTSIF
 
#define UART_FLAG_FE   USART_ISR_FE
 
#define UART_FLAG_IDLE   USART_ISR_IDLE
 
#define UART_FLAG_LBDF   USART_ISR_LBDF
 
#define UART_FLAG_NE   USART_ISR_NE
 
#define UART_FLAG_ORE   USART_ISR_ORE
 
#define UART_FLAG_PE   USART_ISR_PE
 
#define UART_FLAG_RTOF   USART_ISR_RTOF
 
#define UART_FLAG_RWU   USART_ISR_RWU
 
#define UART_FLAG_RXNE   USART_ISR_RXNE
 
#define UART_FLAG_SBKF   USART_ISR_SBKF
 
#define UART_FLAG_TC   USART_ISR_TC
 
#define UART_FLAG_TEACK   USART_ISR_TEACK
 
#define UART_FLAG_TXE   USART_ISR_TXE
 
#define UART_HALF_DUPLEX_DISABLE   0x00000000U
 
#define UART_HALF_DUPLEX_ENABLE   USART_CR3_HDSEL
 
#define UART_HWCONTROL_CTS   USART_CR3_CTSE
 
#define UART_HWCONTROL_NONE   0x00000000U
 
#define UART_HWCONTROL_RTS   USART_CR3_RTSE
 
#define UART_HWCONTROL_RTS_CTS   (USART_CR3_RTSE | USART_CR3_CTSE)
 
#define UART_IT_CM   0x112EU
 
#define UART_IT_CTS   0x096AU
 
#define UART_IT_ERR   0x0060U
 
#define UART_IT_FE   0x0100U
 
#define UART_IT_IDLE   0x0424U
 
#define UART_IT_LBD   0x0846U
 
#define UART_IT_MASK   0x001FU
 
#define UART_IT_NE   0x0200U
 
#define UART_IT_ORE   0x0300U
 
#define UART_IT_PE   0x0028U
 
#define UART_IT_RTO   0x0B3AU
 
#define UART_IT_RXNE   0x0525U
 
#define UART_IT_TC   0x0626U
 
#define UART_IT_TXE   0x0727U
 
#define UART_LIN_DISABLE   0x00000000U
 
#define UART_LIN_ENABLE   USART_CR2_LINEN
 
#define UART_LINBREAKDETECTLENGTH_10B   0x00000000U
 
#define UART_LINBREAKDETECTLENGTH_11B   USART_CR2_LBDL
 
#define UART_MODE_RX   USART_CR1_RE
 
#define UART_MODE_TX   USART_CR1_TE
 
#define UART_MODE_TX_RX   (USART_CR1_TE |USART_CR1_RE)
 
#define UART_MUTE_MODE_REQUEST   USART_RQR_MMRQ
 
#define UART_ONE_BIT_SAMPLE_DISABLE   0x00000000U
 
#define UART_ONE_BIT_SAMPLE_ENABLE   USART_CR3_ONEBIT
 
#define UART_OVERSAMPLING_16   0x00000000U
 
#define UART_OVERSAMPLING_8   USART_CR1_OVER8
 
#define UART_PARITY_EVEN   USART_CR1_PCE
 
#define UART_PARITY_NONE   0x00000000U
 
#define UART_PARITY_ODD   (USART_CR1_PCE | USART_CR1_PS)
 
#define UART_RECEIVER_TIMEOUT_DISABLE   0x00000000U
 
#define UART_RECEIVER_TIMEOUT_ENABLE   USART_CR2_RTOEN
 
#define UART_RXDATA_FLUSH_REQUEST   USART_RQR_RXFRQ
 
#define UART_SENDBREAK_REQUEST   USART_RQR_SBKRQ
 
#define UART_STATE_DISABLE   0x00000000U
 
#define UART_STATE_ENABLE   USART_CR1_UE
 
#define UART_STOPBITS_0_5   USART_CR2_STOP_0
 
#define UART_STOPBITS_1   0x00000000U
 
#define UART_STOPBITS_1_5   (USART_CR2_STOP_0 | USART_CR2_STOP_1)
 
#define UART_STOPBITS_2   USART_CR2_STOP_1
 
#define UART_TXDATA_FLUSH_REQUEST   USART_RQR_TXFRQ
 
#define UART_WAKEUPMETHOD_ADDRESSMARK   USART_CR1_WAKE
 
#define UART_WAKEUPMETHOD_IDLELINE   0x00000000U
 

Typedefs

typedef uint32_t HAL_UART_StateTypeDef
 HAL UART State definition. More...
 
typedef struct __UART_HandleTypeDef UART_HandleTypeDef
 UART handle Structure definition. More...
 

Enumerations

enum  UART_ClockSourceTypeDef {
  UART_CLOCKSOURCE_PCLK1 = 0x00U, UART_CLOCKSOURCE_PCLK2 = 0x01U, UART_CLOCKSOURCE_HSI = 0x02U, UART_CLOCKSOURCE_SYSCLK = 0x04U,
  UART_CLOCKSOURCE_LSE = 0x08U, UART_CLOCKSOURCE_UNDEFINED = 0x10U, UART_CLOCKSOURCE_D2PCLK1 = 0x00U, UART_CLOCKSOURCE_D2PCLK2 = 0x01U,
  UART_CLOCKSOURCE_D3PCLK1 = 0x02U, UART_CLOCKSOURCE_PLL2 = 0x04U, UART_CLOCKSOURCE_PLL3 = 0x08U, UART_CLOCKSOURCE_HSI = 0x10U,
  UART_CLOCKSOURCE_CSI = 0x20U, UART_CLOCKSOURCE_LSE = 0x40U, UART_CLOCKSOURCE_UNDEFINED = 0x80U, UART_CLOCKSOURCE_D2PCLK1 = 0x00U,
  UART_CLOCKSOURCE_D2PCLK2 = 0x01U, UART_CLOCKSOURCE_D3PCLK1 = 0x02U, UART_CLOCKSOURCE_PLL2 = 0x04U, UART_CLOCKSOURCE_PLL3 = 0x08U,
  UART_CLOCKSOURCE_HSI = 0x10U, UART_CLOCKSOURCE_CSI = 0x20U, UART_CLOCKSOURCE_LSE = 0x40U, UART_CLOCKSOURCE_UNDEFINED = 0x80U
}
 UART clock sources definition. More...
 

Functions

HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver (UART_HandleTypeDef *huart)
 
HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter (UART_HandleTypeDef *huart)
 
HAL_StatusTypeDef HAL_HalfDuplex_Init (UART_HandleTypeDef *huart)
 
HAL_StatusTypeDef HAL_LIN_Init (UART_HandleTypeDef *huart, uint32_t BreakDetectLength)
 
HAL_StatusTypeDef HAL_LIN_SendBreak (UART_HandleTypeDef *huart)
 
HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode (UART_HandleTypeDef *huart)
 
HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode (UART_HandleTypeDef *huart)
 
HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode (UART_HandleTypeDef *huart)
 
HAL_StatusTypeDef HAL_MultiProcessor_Init (UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod)
 
HAL_StatusTypeDef HAL_UART_Abort (UART_HandleTypeDef *huart)
 
HAL_StatusTypeDef HAL_UART_Abort_IT (UART_HandleTypeDef *huart)
 
void HAL_UART_AbortCpltCallback (UART_HandleTypeDef *huart)
 
HAL_StatusTypeDef HAL_UART_AbortReceive (UART_HandleTypeDef *huart)
 
HAL_StatusTypeDef HAL_UART_AbortReceive_IT (UART_HandleTypeDef *huart)
 
void HAL_UART_AbortReceiveCpltCallback (UART_HandleTypeDef *huart)
 
HAL_StatusTypeDef HAL_UART_AbortTransmit (UART_HandleTypeDef *huart)
 
HAL_StatusTypeDef HAL_UART_AbortTransmit_IT (UART_HandleTypeDef *huart)
 
void HAL_UART_AbortTransmitCpltCallback (UART_HandleTypeDef *huart)
 
HAL_StatusTypeDef HAL_UART_DeInit (UART_HandleTypeDef *huart)
 
HAL_StatusTypeDef HAL_UART_DisableReceiverTimeout (UART_HandleTypeDef *huart)
 
HAL_StatusTypeDef HAL_UART_DMAPause (UART_HandleTypeDef *huart)
 
HAL_StatusTypeDef HAL_UART_DMAResume (UART_HandleTypeDef *huart)
 
HAL_StatusTypeDef HAL_UART_DMAStop (UART_HandleTypeDef *huart)
 
HAL_StatusTypeDef HAL_UART_EnableReceiverTimeout (UART_HandleTypeDef *huart)
 
void HAL_UART_ErrorCallback (UART_HandleTypeDef *huart)
 
uint32_t HAL_UART_GetError (UART_HandleTypeDef *huart)
 
HAL_UART_StateTypeDef HAL_UART_GetState (UART_HandleTypeDef *huart)
 
HAL_StatusTypeDef HAL_UART_Init (UART_HandleTypeDef *huart)
 
void HAL_UART_IRQHandler (UART_HandleTypeDef *huart)
 
void HAL_UART_MspDeInit (UART_HandleTypeDef *huart)
 UART MSP De-Initialization This function freeze the hardware resources used in this example. More...
 
void HAL_UART_MspInit (UART_HandleTypeDef *huart)
 UART MSP Initialization This function configures the hardware resources used in this example. More...
 
HAL_StatusTypeDef HAL_UART_Receive (UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout)
 
HAL_StatusTypeDef HAL_UART_Receive_DMA (UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
 
HAL_StatusTypeDef HAL_UART_Receive_IT (UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
 
void HAL_UART_ReceiverTimeout_Config (UART_HandleTypeDef *huart, uint32_t TimeoutValue)
 
void HAL_UART_RxCpltCallback (UART_HandleTypeDef *huart)
 
void HAL_UART_RxHalfCpltCallback (UART_HandleTypeDef *huart)
 
HAL_StatusTypeDef HAL_UART_Transmit (UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout)
 
HAL_StatusTypeDef HAL_UART_Transmit_DMA (UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
 
HAL_StatusTypeDef HAL_UART_Transmit_IT (UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
 
void HAL_UART_TxCpltCallback (UART_HandleTypeDef *huart)
 
void HAL_UART_TxHalfCpltCallback (UART_HandleTypeDef *huart)
 
void UART_AdvFeatureConfig (UART_HandleTypeDef *huart)
 
HAL_StatusTypeDef UART_CheckIdleState (UART_HandleTypeDef *huart)
 
HAL_StatusTypeDef UART_SetConfig (UART_HandleTypeDef *huart)
 
HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout (UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Tickstart, uint32_t Timeout)
 

Detailed Description

Header file of UART HAL module.

Author
MCD Application Team
Attention

© Copyright (c) 2017 STMicroelectronics. All rights reserved.

This software component is licensed by ST under BSD 3-Clause license, the "License"; You may not use this file except in compliance with the License. You may obtain a copy of the License at: opensource.org/licenses/BSD-3-Clause

Definition in file stm32f7xx_hal_uart.h.



picovoice_driver
Author(s):
autogenerated on Fri Apr 1 2022 02:15:02