sensor_epsonG320.h
Go to the documentation of this file.
1 //==============================================================================
2 //
3 // sensor_epsonG320.h - Epson G320 sensor specific definitions
4 //
5 //
6 // THE SOFTWARE IS RELEASED INTO THE PUBLIC DOMAIN.
7 // THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
8 // IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
9 // NONINFRINGEMENT, SECURITY, SATISFACTORY QUALITY, AND FITNESS FOR A
10 // PARTICULAR PURPOSE. IN NO EVENT SHALL EPSON BE LIABLE FOR ANY LOSS, DAMAGE
11 // OR CLAIM, ARISING FROM OR IN CONNECTION WITH THE SOFTWARE OR THE USE OF THE
12 // SOFTWARE.
13 //
14 //==============================================================================
15 #ifndef EPSONG320_H_
16 #define EPSONG320_H_
17 
18 #define EPSON_ACCL_SF (.200)
19 #define EPSON_GYRO_SF (.008)
20 #define EPSON_TEMP_SF (-0.0037918)
21 #define EPSON_ATTI_SF (0.0)
22 #define EPSON_COUNT_SF (21333)
23 
24 #define EPSON_DA_SF0 (0.0)
25 #define EPSON_DA_SF1 (0.0)
26 #define EPSON_DA_SF2 (0.0)
27 #define EPSON_DA_SF3 (0.0)
28 #define EPSON_DA_SF4 (0.0)
29 #define EPSON_DA_SF5 (0.0)
30 #define EPSON_DA_SF6 (0.0)
31 #define EPSON_DA_SF7 (0.0)
32 #define EPSON_DA_SF8 (0.0)
33 #define EPSON_DA_SF9 (0.0)
34 #define EPSON_DA_SF10 (0.0)
35 #define EPSON_DA_SF11 (0.0)
36 #define EPSON_DA_SF12 (0.0)
37 #define EPSON_DA_SF13 (0.0)
38 #define EPSON_DA_SF14 (0.0)
39 #define EPSON_DA_SF15 (0.0)
40 
41 #define EPSON_DV_SF0 (0.0)
42 #define EPSON_DV_SF1 (0.0)
43 #define EPSON_DV_SF2 (0.0)
44 #define EPSON_DV_SF3 (0.0)
45 #define EPSON_DV_SF4 (0.0)
46 #define EPSON_DV_SF5 (0.0)
47 #define EPSON_DV_SF6 (0.0)
48 #define EPSON_DV_SF7 (0.0)
49 #define EPSON_DV_SF8 (0.0)
50 #define EPSON_DV_SF9 (0.0)
51 #define EPSON_DV_SF10 (0.0)
52 #define EPSON_DV_SF11 (0.0)
53 #define EPSON_DV_SF12 (0.0)
54 #define EPSON_DV_SF13 (0.0)
55 #define EPSON_DV_SF14 (0.0)
56 #define EPSON_DV_SF15 (0.0)
57 
58 /* -- Commands --
59 - ADDR_ address byte of transfer to select the register to access
60 - CMD_ data byte of transfer to write to the register selected
61 
62 - All accesses are 16 bit transfers
63 - For SPI IF:
64  - For SPI write accesses - 8-bit address with msb=1b (can be even or
65  odd) + 8-bit write
66 data
67  - No response
68  - For SPI read accesses - 8-bit address with msb=0b(even only) + 8-bit
69  dummy data
70  - Response is
71 transferred on MOSI on next SPI access
72  - Return value is
73 16-bit read data (high byte + low byte)
74 - For UART IF:
75  - For UART write accesses - 8-bit address with msb=1b(can be even or
76  odd) + 8-bit write data + Delimiter Byte
77  - No response
78  - For UART read accesses - 8-bit address with msb=0b(even only) + 8-bit
79  dummy data + Delimiter Byte
80  - Response is
81 transferred immediately
82  - Return value
83 consists of Register Read Address + 16-bit read data (high byte + low byte) +
84 Delimiter Byte
85 
86 - NOTE: Register Address Maps that depend on the WINDOW_ID (page) */
87 
88 // WINDOW_ID 0
89 #define ADDR_MODE_CTRL_LO 0x02 // MODE_CTRL Byte0 (W0)
90 #define ADDR_MODE_CTRL_HI 0x03 // MODE_CTRL Byte1 (W0)
91 #define ADDR_DIAG_STAT 0x04 // DIAG_STAT Byte0 (W0)
92 #define ADDR_FLAG 0x06 // FLAG(ND/EA) (W0)
93 #define ADDR_GPIO 0x08 // GPIO (W0)
94 #define ADDR_COUNT 0x0A // COUNT (W0)
95 #define ADDR_TEMP_HIGH 0x0E // TEMPC HIGH (W0)
96 #define ADDR_TEMP_LOW 0x10 // TEMPC LOW (W0)
97 #define ADDR_XGYRO_HIGH 0x12 // XGYRO HIGH (W0)
98 #define ADDR_XGYRO_LOW 0x14 // XGYRO LOW (W0)
99 #define ADDR_YGYRO_HIGH 0x16 // YGYRO HIGH (W0)
100 #define ADDR_YGYRO_LOW 0x18 // YGYRO LOW (W0)
101 #define ADDR_ZGYRO_HIGH 0x1A // ZGYRO HIGH (W0)
102 #define ADDR_ZGYRO_LOW 0x1C // ZGYRO LOW (W0)
103 #define ADDR_XACCL_HIGH 0x1E // XACCL HIGH (W0)
104 #define ADDR_XACCL_LOW 0x20 // XACCL LOW (W0)
105 #define ADDR_YACCL_HIGH 0x22 // YACCL HIGH (W0)
106 #define ADDR_YACCL_LOW 0x24 // YACCL LOW (W0)
107 #define ADDR_ZACCL_HIGH 0x26 // ZACCL HIGH (W0)
108 #define ADDR_ZACCL_LOW 0x28 // ZACCL LOW (W0)
109 
110 // WINDOW_ID 1
111 #define ADDR_SIG_CTRL_LO 0x00 // SIG_CTRL Byte0 (W1)
112 #define ADDR_SIG_CTRL_HI 0x01 // SIG_CTRL Byte1 (W1)
113 #define ADDR_MSC_CTRL_LO 0x02 // MSC_CTRL Byte0 (W1)
114 #define ADDR_MSC_CTRL_HI 0x03 // MSC_CTRL Byte1 (W1)
115 #define ADDR_SMPL_CTRL_LO 0x04 // SMPL_CTRL Byte0 (W1)
116 #define ADDR_SMPL_CTRL_HI 0x05 // SMPL_CTRL Byte1 (W1)
117 #define ADDR_FILTER_CTRL_LO 0x06 // FILTER_CTRL Byte0 (W1)
118 #define ADDR_FILTER_CTRL_HI 0x07 // FILTER_CTRL Byte1 (W1)
119 #define ADDR_UART_CTRL_LO 0x08 // UART_CTRL Byte0 (W1)
120 #define ADDR_UART_CTRL_HI 0x09 // UART_CTRL Byte1 (W1)
121 #define ADDR_GLOB_CMD_LO 0x0A // GLOB_CMD Byte0 (W1)
122 #define ADDR_GLOB_CMD_HI 0x0B // GLOB_CMD Byte1 (W1)
123 #define ADDR_BURST_CTRL1_LO 0x0C // BURST_CTRL1 Byte0 (W1)
124 #define ADDR_BURST_CTRL1_HI 0x0D // BURST_CTRL1 Byte1 (W1)
125 #define ADDR_BURST_CTRL2_LO 0x0E // BURST_CTRL2 Byte0 (W1)
126 #define ADDR_BURST_CTRL2_HI 0x0F // BURST_CTRL2 Byte1 (W1)
127 #define ADDR_POL_CTRL_LO 0x10 // POL_CTRL Byte0 (W1)
128 #define ADDR_POL_CTRL_HI 0x11 // POL_CTRL Byte1 (W1)
129 
130 #define ADDR_PROD_ID1 0x6A // PROD_ID1(W1)
131 #define ADDR_PROD_ID2 0x6C // PROD_ID2(W1)
132 #define ADDR_PROD_ID3 0x6E // PROD_ID3(W1)
133 #define ADDR_PROD_ID4 0x70 // PROD_ID4(W1)
134 #define ADDR_VERSION 0x72 // VERSION(W1)
135 #define ADDR_SERIAL_NUM1 0x74 // SERIAL_NUM1(W1)
136 #define ADDR_SERIAL_NUM2 0x76 // SERIAL_NUM2(W1)
137 #define ADDR_SERIAL_NUM3 0x78 // SERIAL_NUM3(W1)
138 #define ADDR_SERIAL_NUM4 0x7A // SERIAL_NUM4(W1)
139 #define ADDR_WIN_CTRL 0x7E // WIN_CTRL(W0 or W1)
140 
141 #define CMD_BURST 0x80 // Write value to Issue Burst Read
142 #define CMD_WINDOW0 0x00 // Write value for WIN_CTRL to change to Window 0
143 #define CMD_WINDOW1 0x01 // Write value for WIN_CTRL to change to Window 1
144 #define CMD_BEGIN_SAMPLING \
145  0x01 // Write value for MODE_CMD_HI to begin sampling
146 #define CMD_END_SAMPLING 0x02 // Write value for MODE_CMD_HI to stop sampling
147 #define CMD_SOFTRESET \
148  0x80 // Write value for GLOB_CMD_LO to issue Software Reset
149 #define CMD_FLASHTEST 0x08 // Write value for MSC_CTRL_HI to issue Flashtest
150 #define CMD_SELFTEST 0x04 // Write value for MSC_CTRL_HI to issue Selftest
151 
152 // Write values for ADDR_SMPL_CTRL_HI to set Output Rate
153 #define CMD_RATE2000 0x00 // TAP>=0
154 #define CMD_RATE1000 0x01 // TAP>=2
155 #define CMD_RATE500 0x02 // TAP>=4
156 #define CMD_RATE250 0x03 // TAP>=8
157 #define CMD_RATE125 0x04 // TAP>=16
158 #define CMD_RATE62_5 0x05 // TAP>=32
159 #define CMD_RATE31_25 0x06 // TAP>=64
160 #define CMD_RATE15_625 0x07 // TAP=128
161 #define CMD_RATE400 0x08 // TAP>=8
162 #define CMD_RATE200 0x09 // TAP>=16
163 #define CMD_RATE100 0x0A // TAP>=32
164 #define CMD_RATE80 0x0B // TAP>=32
165 #define CMD_RATE50 0x0C // TAP>=64
166 #define CMD_RATE40 0x0D // TAP>=64
167 #define CMD_RATE25 0x0E // TAP=128
168 #define CMD_RATE20 0x0F // TAP=128
169 
170 // Write values for FILTER_CTRL_LO to set Filter
171 #define CMD_FLTAP0 0x00
172 #define CMD_FLTAP2 0x01
173 #define CMD_FLTAP4 0x02
174 #define CMD_FLTAP8 0x03
175 #define CMD_FLTAP16 0x04
176 #define CMD_FLTAP32 0x05
177 #define CMD_FLTAP64 0x06
178 #define CMD_FLTAP128 0x07
179 #define CMD_FIRTAP32FC50 0x08
180 #define CMD_FIRTAP32FC100 0x09
181 #define CMD_FIRTAP32FC200 0x0A
182 #define CMD_FIRTAP32FC400 0x0B
183 #define CMD_FIRTAP64FC50 0x0C
184 #define CMD_FIRTAP64FC100 0x0D
185 #define CMD_FIRTAP64FC200 0x0E
186 #define CMD_FIRTAP64FC400 0x0F
187 #define CMD_FIRTAP128FC50 0x10
188 #define CMD_FIRTAP128FC100 0x11
189 #define CMD_FIRTAP128FC200 0x12
190 #define CMD_FIRTAP128FC400 0x13
191 
192 // MODE STAT
193 #define VAL_SAMPLING_MODE 0x00
194 #define VAL_CONFIG_MODE 0x04
195 
196 #endif /* EPSONG320_H_ */

ess_imu_ros1_uart_driver
Author(s):
autogenerated on Sun Jun 4 2023 02:59:29