File: ublox_msgs/RxmRAWX.msg
Raw Message Definition
# RXM-RAWX (0x02 0x15)
# Multi-GNSS Raw Measurement Data
#
# This message contains the information needed to be able to generate a RINEX 3
# multi-GNSS observation file.
# This message contains pseudorange, Doppler, carrier phase, phase lock and
# signal quality information for GNSS satellites once signals have been
# synchronized. This message supports all active GNSS.
#
uint8 CLASS_ID = 2
uint8 MESSAGE_ID = 21
float64 rcvTOW # Measurement time of week in receiver local time [s]
# approximately aligned to the GPS time system. The
# receiver local time of week number and leap second
# information can be used to translate the time to other
# time systems. More information about the difference in
# time systems can be found in RINEX 3 documentation.
# For a receiver operating in GLONASS only mode, UTC
# time can be determined by subtracting the leapS field
# from GPS time regardless of whether the GPS leap
# seconds are valid.
uint16 week # GPS week number in receiver local time. [weeks]
int8 leapS # GPS leap seconds (GPS-UTC). [s]
# This field represents the receiver's best knowledge of
# the leap seconds offset. A flag is given in the
# recStat bitfield to indicate if the leap seconds
# are known.
uint8 numMeas # # of measurements to follow
uint8 recStat # Receiver tracking status bitfield
uint8 REC_STAT_LEAP_SEC = 1 # Leap seconds have been determined
uint8 REC_STAT_CLK_RESET = 2 # Clock reset applied. Typically the receiver
# clock is changed in increments of integer
# milliseconds.
uint8 version # Message version (0x01 for this version).
uint8[2] reserved1 # Reserved
RxmRAWX_Meas[] meas
Compact Message Definition
uint8 CLASS_ID=2
uint8 MESSAGE_ID=21
uint8 REC_STAT_LEAP_SEC=1
uint8 REC_STAT_CLK_RESET=2
float64 rcvTOW
uint16 week
int8 leapS
uint8 numMeas
uint8 recStat
uint8 version
uint8[2] reserved1
ublox_msgs/RxmRAWX_Meas[] meas