zlaqr0.c

Go to the documentation of this file.

/* zlaqr0.f -- translated by f2c (version 20061008).
   You must link the resulting object file with libf2c:
        on Microsoft Windows system, link with libf2c.lib;
        on Linux or Unix systems, link with .../path/to/libf2c.a -lm
        or, if you install libf2c.a in a standard place, with -lf2c -lm
        -- in that order, at the end of the command line, as in
                cc *.o -lf2c -lm
        Source for libf2c is in /netlib/f2c/libf2c.zip, e.g.,

                http://www.netlib.org/f2c/libf2c.zip
*/

#include "f2c.h"
#include "blaswrap.h"

/* Table of constant values */

static integer c__13 = 13;
static integer c__15 = 15;
static integer c_n1 = -1;
static integer c__12 = 12;
static integer c__14 = 14;
static integer c__16 = 16;
static logical c_false = FALSE_;
static integer c__1 = 1;
static integer c__3 = 3;

/* Subroutine */ int zlaqr0_(logical *wantt, logical *wantz, integer *n, 
        integer *ilo, integer *ihi, doublecomplex *h__, integer *ldh, 
        doublecomplex *w, integer *iloz, integer *ihiz, doublecomplex *z__, 
        integer *ldz, doublecomplex *work, integer *lwork, integer *info)
{
    /* System generated locals */
    integer h_dim1, h_offset, z_dim1, z_offset, i__1, i__2, i__3, i__4, i__5;
    doublereal d__1, d__2, d__3, d__4, d__5, d__6, d__7, d__8;
    doublecomplex z__1, z__2, z__3, z__4, z__5;

    /* Builtin functions */
    double d_imag(doublecomplex *);
    void z_sqrt(doublecomplex *, doublecomplex *);

    /* Local variables */
    integer i__, k;
    doublereal s;
    doublecomplex aa, bb, cc, dd;
    integer ld, nh, it, ks, kt, ku, kv, ls, ns, nw;
    doublecomplex tr2, det;
    integer inf, kdu, nho, nve, kwh, nsr, nwr, kwv, ndec, ndfl, kbot, nmin;
    doublecomplex swap;
    integer ktop;
    doublecomplex zdum[1]       /* was [1][1] */;
    integer kacc22, itmax, nsmax, nwmax, kwtop;
    extern /* Subroutine */ int zlaqr3_(logical *, logical *, integer *, 
            integer *, integer *, integer *, doublecomplex *, integer *, 
            integer *, integer *, doublecomplex *, integer *, integer *, 
            integer *, doublecomplex *, doublecomplex *, integer *, integer *, 
             doublecomplex *, integer *, integer *, doublecomplex *, integer *
, doublecomplex *, integer *), zlaqr4_(logical *, logical *, 
            integer *, integer *, integer *, doublecomplex *, integer *, 
            doublecomplex *, integer *, integer *, doublecomplex *, integer *, 
             doublecomplex *, integer *, integer *), zlaqr5_(logical *, 
            logical *, integer *, integer *, integer *, integer *, integer *, 
            doublecomplex *, doublecomplex *, integer *, integer *, integer *, 
             doublecomplex *, integer *, doublecomplex *, integer *, 
            doublecomplex *, integer *, integer *, doublecomplex *, integer *, 
             integer *, doublecomplex *, integer *);
    integer nibble;
    extern integer ilaenv_(integer *, char *, char *, integer *, integer *, 
            integer *, integer *);
    char jbcmpz[2];
    doublecomplex rtdisc;
    integer nwupbd;
    logical sorted;
    extern /* Subroutine */ int zlahqr_(logical *, logical *, integer *, 
            integer *, integer *, doublecomplex *, integer *, doublecomplex *, 
             integer *, integer *, doublecomplex *, integer *, integer *), 
            zlacpy_(char *, integer *, integer *, doublecomplex *, integer *, 
            doublecomplex *, integer *);
    integer lwkopt;


/*  -- LAPACK auxiliary routine (version 3.2) -- */
/*     Univ. of Tennessee, Univ. of California Berkeley, Univ. of Colorado Denver and NAG Ltd.. */
/*     November 2006 */

/*     .. Scalar Arguments .. */
/*     .. */
/*     .. Array Arguments .. */
/*     .. */

/*     Purpose */
/*     ======= */

/*     ZLAQR0 computes the eigenvalues of a Hessenberg matrix H */
/*     and, optionally, the matrices T and Z from the Schur decomposition */
/*     H = Z T Z**H, where T is an upper triangular matrix (the */
/*     Schur form), and Z is the unitary matrix of Schur vectors. */

/*     Optionally Z may be postmultiplied into an input unitary */
/*     matrix Q so that this routine can give the Schur factorization */
/*     of a matrix A which has been reduced to the Hessenberg form H */
/*     by the unitary matrix Q:  A = Q*H*Q**H = (QZ)*H*(QZ)**H. */

/*     Arguments */
/*     ========= */

/*     WANTT   (input) LOGICAL */
/*          = .TRUE. : the full Schur form T is required; */
/*          = .FALSE.: only eigenvalues are required. */

/*     WANTZ   (input) LOGICAL */
/*          = .TRUE. : the matrix of Schur vectors Z is required; */
/*          = .FALSE.: Schur vectors are not required. */

/*     N     (input) INTEGER */
/*           The order of the matrix H.  N .GE. 0. */

/*     ILO   (input) INTEGER */
/*     IHI   (input) INTEGER */
/*           It is assumed that H is already upper triangular in rows */
/*           and columns 1:ILO-1 and IHI+1:N and, if ILO.GT.1, */
/*           H(ILO,ILO-1) is zero. ILO and IHI are normally set by a */
/*           previous call to ZGEBAL, and then passed to ZGEHRD when the */
/*           matrix output by ZGEBAL is reduced to Hessenberg form. */
/*           Otherwise, ILO and IHI should be set to 1 and N, */
/*           respectively.  If N.GT.0, then 1.LE.ILO.LE.IHI.LE.N. */
/*           If N = 0, then ILO = 1 and IHI = 0. */

/*     H     (input/output) COMPLEX*16 array, dimension (LDH,N) */
/*           On entry, the upper Hessenberg matrix H. */
/*           On exit, if INFO = 0 and WANTT is .TRUE., then H */
/*           contains the upper triangular matrix T from the Schur */
/*           decomposition (the Schur form). If INFO = 0 and WANT is */
/*           .FALSE., then the contents of H are unspecified on exit. */
/*           (The output value of H when INFO.GT.0 is given under the */
/*           description of INFO below.) */

/*           This subroutine may explicitly set H(i,j) = 0 for i.GT.j and */
/*           j = 1, 2, ... ILO-1 or j = IHI+1, IHI+2, ... N. */

/*     LDH   (input) INTEGER */
/*           The leading dimension of the array H. LDH .GE. max(1,N). */

/*     W        (output) COMPLEX*16 array, dimension (N) */
/*           The computed eigenvalues of H(ILO:IHI,ILO:IHI) are stored */
/*           in W(ILO:IHI). If WANTT is .TRUE., then the eigenvalues are */
/*           stored in the same order as on the diagonal of the Schur */
/*           form returned in H, with W(i) = H(i,i). */

/*     Z     (input/output) COMPLEX*16 array, dimension (LDZ,IHI) */
/*           If WANTZ is .FALSE., then Z is not referenced. */
/*           If WANTZ is .TRUE., then Z(ILO:IHI,ILOZ:IHIZ) is */
/*           replaced by Z(ILO:IHI,ILOZ:IHIZ)*U where U is the */
/*           orthogonal Schur factor of H(ILO:IHI,ILO:IHI). */
/*           (The output value of Z when INFO.GT.0 is given under */
/*           the description of INFO below.) */

/*     LDZ   (input) INTEGER */
/*           The leading dimension of the array Z.  if WANTZ is .TRUE. */
/*           then LDZ.GE.MAX(1,IHIZ).  Otherwize, LDZ.GE.1. */

/*     WORK  (workspace/output) COMPLEX*16 array, dimension LWORK */
/*           On exit, if LWORK = -1, WORK(1) returns an estimate of */
/*           the optimal value for LWORK. */

/*     LWORK (input) INTEGER */
/*           The dimension of the array WORK.  LWORK .GE. max(1,N) */
/*           is sufficient, but LWORK typically as large as 6*N may */
/*           be required for optimal performance.  A workspace query */
/*           to determine the optimal workspace size is recommended. */

/*           If LWORK = -1, then ZLAQR0 does a workspace query. */
/*           In this case, ZLAQR0 checks the input parameters and */
/*           estimates the optimal workspace size for the given */
/*           values of N, ILO and IHI.  The estimate is returned */
/*           in WORK(1).  No error message related to LWORK is */
/*           issued by XERBLA.  Neither H nor Z are accessed. */


/*     INFO  (output) INTEGER */
/*             =  0:  successful exit */
/*           .GT. 0:  if INFO = i, ZLAQR0 failed to compute all of */
/*                the eigenvalues.  Elements 1:ilo-1 and i+1:n of WR */
/*                and WI contain those eigenvalues which have been */
/*                successfully computed.  (Failures are rare.) */

/*                If INFO .GT. 0 and WANT is .FALSE., then on exit, */
/*                the remaining unconverged eigenvalues are the eigen- */
/*                values of the upper Hessenberg matrix rows and */
/*                columns ILO through INFO of the final, output */
/*                value of H. */

/*                If INFO .GT. 0 and WANTT is .TRUE., then on exit */

/*           (*)  (initial value of H)*U  = U*(final value of H) */

/*                where U is a unitary matrix.  The final */
/*                value of  H is upper Hessenberg and triangular in */
/*                rows and columns INFO+1 through IHI. */

/*                If INFO .GT. 0 and WANTZ is .TRUE., then on exit */

/*                  (final value of Z(ILO:IHI,ILOZ:IHIZ) */
/*                   =  (initial value of Z(ILO:IHI,ILOZ:IHIZ)*U */

/*                where U is the unitary matrix in (*) (regard- */
/*                less of the value of WANTT.) */

/*                If INFO .GT. 0 and WANTZ is .FALSE., then Z is not */
/*                accessed. */

/*     ================================================================ */
/*     Based on contributions by */
/*        Karen Braman and Ralph Byers, Department of Mathematics, */
/*        University of Kansas, USA */

/*     ================================================================ */
/*     References: */
/*       K. Braman, R. Byers and R. Mathias, The Multi-Shift QR */
/*       Algorithm Part I: Maintaining Well Focused Shifts, and Level 3 */
/*       Performance, SIAM Journal of Matrix Analysis, volume 23, pages */
/*       929--947, 2002. */

/*       K. Braman, R. Byers and R. Mathias, The Multi-Shift QR */
/*       Algorithm Part II: Aggressive Early Deflation, SIAM Journal */
/*       of Matrix Analysis, volume 23, pages 948--973, 2002. */

/*     ================================================================ */
/*     .. Parameters .. */

/*     ==== Matrices of order NTINY or smaller must be processed by */
/*     .    ZLAHQR because of insufficient subdiagonal scratch space. */
/*     .    (This is a hard limit.) ==== */

/*     ==== Exceptional deflation windows:  try to cure rare */
/*     .    slow convergence by varying the size of the */
/*     .    deflation window after KEXNW iterations. ==== */

/*     ==== Exceptional shifts: try to cure rare slow convergence */
/*     .    with ad-hoc exceptional shifts every KEXSH iterations. */
/*     .    ==== */

/*     ==== The constant WILK1 is used to form the exceptional */
/*     .    shifts. ==== */
/*     .. */
/*     .. Local Scalars .. */
/*     .. */
/*     .. External Functions .. */
/*     .. */
/*     .. Local Arrays .. */
/*     .. */
/*     .. External Subroutines .. */
/*     .. */
/*     .. Intrinsic Functions .. */
/*     .. */
/*     .. Statement Functions .. */
/*     .. */
/*     .. Statement Function definitions .. */
/*     .. */
/*     .. Executable Statements .. */
    /* Parameter adjustments */
    h_dim1 = *ldh;
    h_offset = 1 + h_dim1;
    h__ -= h_offset;
    --w;
    z_dim1 = *ldz;
    z_offset = 1 + z_dim1;
    z__ -= z_offset;
    --work;

    /* Function Body */
    *info = 0;

/*     ==== Quick return for N = 0: nothing to do. ==== */

    if (*n == 0) {
        work[1].r = 1., work[1].i = 0.;
        return 0;
    }

    if (*n <= 11) {

/*        ==== Tiny matrices must use ZLAHQR. ==== */

        lwkopt = 1;
        if (*lwork != -1) {
            zlahqr_(wantt, wantz, n, ilo, ihi, &h__[h_offset], ldh, &w[1], 
                    iloz, ihiz, &z__[z_offset], ldz, info);
        }
    } else {

/*        ==== Use small bulge multi-shift QR with aggressive early */
/*        .    deflation on larger-than-tiny matrices. ==== */

/*        ==== Hope for the best. ==== */

        *info = 0;

/*        ==== Set up job flags for ILAENV. ==== */

        if (*wantt) {
            *(unsigned char *)jbcmpz = 'S';
        } else {
            *(unsigned char *)jbcmpz = 'E';
        }
        if (*wantz) {
            *(unsigned char *)&jbcmpz[1] = 'V';
        } else {
            *(unsigned char *)&jbcmpz[1] = 'N';
        }

/*        ==== NWR = recommended deflation window size.  At this */
/*        .    point,  N .GT. NTINY = 11, so there is enough */
/*        .    subdiagonal workspace for NWR.GE.2 as required. */
/*        .    (In fact, there is enough subdiagonal space for */
/*        .    NWR.GE.3.) ==== */

        nwr = ilaenv_(&c__13, "ZLAQR0", jbcmpz, n, ilo, ihi, lwork);
        nwr = max(2,nwr);
/* Computing MIN */
        i__1 = *ihi - *ilo + 1, i__2 = (*n - 1) / 3, i__1 = min(i__1,i__2);
        nwr = min(i__1,nwr);

/*        ==== NSR = recommended number of simultaneous shifts. */
/*        .    At this point N .GT. NTINY = 11, so there is at */
/*        .    enough subdiagonal workspace for NSR to be even */
/*        .    and greater than or equal to two as required. ==== */

        nsr = ilaenv_(&c__15, "ZLAQR0", jbcmpz, n, ilo, ihi, lwork);
/* Computing MIN */
        i__1 = nsr, i__2 = (*n + 6) / 9, i__1 = min(i__1,i__2), i__2 = *ihi - 
                *ilo;
        nsr = min(i__1,i__2);
/* Computing MAX */
        i__1 = 2, i__2 = nsr - nsr % 2;
        nsr = max(i__1,i__2);

/*        ==== Estimate optimal workspace ==== */

/*        ==== Workspace query call to ZLAQR3 ==== */

        i__1 = nwr + 1;
        zlaqr3_(wantt, wantz, n, ilo, ihi, &i__1, &h__[h_offset], ldh, iloz, 
                ihiz, &z__[z_offset], ldz, &ls, &ld, &w[1], &h__[h_offset], 
                ldh, n, &h__[h_offset], ldh, n, &h__[h_offset], ldh, &work[1], 
                 &c_n1);

/*        ==== Optimal workspace = MAX(ZLAQR5, ZLAQR3) ==== */

/* Computing MAX */
        i__1 = nsr * 3 / 2, i__2 = (integer) work[1].r;
        lwkopt = max(i__1,i__2);

/*        ==== Quick return in case of workspace query. ==== */

        if (*lwork == -1) {
            d__1 = (doublereal) lwkopt;
            z__1.r = d__1, z__1.i = 0.;
            work[1].r = z__1.r, work[1].i = z__1.i;
            return 0;
        }

/*        ==== ZLAHQR/ZLAQR0 crossover point ==== */

        nmin = ilaenv_(&c__12, "ZLAQR0", jbcmpz, n, ilo, ihi, lwork);
        nmin = max(11,nmin);

/*        ==== Nibble crossover point ==== */

        nibble = ilaenv_(&c__14, "ZLAQR0", jbcmpz, n, ilo, ihi, lwork);
        nibble = max(0,nibble);

/*        ==== Accumulate reflections during ttswp?  Use block */
/*        .    2-by-2 structure during matrix-matrix multiply? ==== */

        kacc22 = ilaenv_(&c__16, "ZLAQR0", jbcmpz, n, ilo, ihi, lwork);
        kacc22 = max(0,kacc22);
        kacc22 = min(2,kacc22);

/*        ==== NWMAX = the largest possible deflation window for */
/*        .    which there is sufficient workspace. ==== */

/* Computing MIN */
        i__1 = (*n - 1) / 3, i__2 = *lwork / 2;
        nwmax = min(i__1,i__2);
        nw = nwmax;

/*        ==== NSMAX = the Largest number of simultaneous shifts */
/*        .    for which there is sufficient workspace. ==== */

/* Computing MIN */
        i__1 = (*n + 6) / 9, i__2 = (*lwork << 1) / 3;
        nsmax = min(i__1,i__2);
        nsmax -= nsmax % 2;

/*        ==== NDFL: an iteration count restarted at deflation. ==== */

        ndfl = 1;

/*        ==== ITMAX = iteration limit ==== */

/* Computing MAX */
        i__1 = 10, i__2 = *ihi - *ilo + 1;
        itmax = max(i__1,i__2) * 30;

/*        ==== Last row and column in the active block ==== */

        kbot = *ihi;

/*        ==== Main Loop ==== */

        i__1 = itmax;
        for (it = 1; it <= i__1; ++it) {

/*           ==== Done when KBOT falls below ILO ==== */

            if (kbot < *ilo) {
                goto L80;
            }

/*           ==== Locate active block ==== */

            i__2 = *ilo + 1;
            for (k = kbot; k >= i__2; --k) {
                i__3 = k + (k - 1) * h_dim1;
                if (h__[i__3].r == 0. && h__[i__3].i == 0.) {
                    goto L20;
                }
/* L10: */
            }
            k = *ilo;
L20:
            ktop = k;

/*           ==== Select deflation window size: */
/*           .    Typical Case: */
/*           .      If possible and advisable, nibble the entire */
/*           .      active block.  If not, use size MIN(NWR,NWMAX) */
/*           .      or MIN(NWR+1,NWMAX) depending upon which has */
/*           .      the smaller corresponding subdiagonal entry */
/*           .      (a heuristic). */
/*           . */
/*           .    Exceptional Case: */
/*           .      If there have been no deflations in KEXNW or */
/*           .      more iterations, then vary the deflation window */
/*           .      size.   At first, because, larger windows are, */
/*           .      in general, more powerful than smaller ones, */
/*           .      rapidly increase the window to the maximum possible. */
/*           .      Then, gradually reduce the window size. ==== */

            nh = kbot - ktop + 1;
            nwupbd = min(nh,nwmax);
            if (ndfl < 5) {
                nw = min(nwupbd,nwr);
            } else {
/* Computing MIN */
                i__2 = nwupbd, i__3 = nw << 1;
                nw = min(i__2,i__3);
            }
            if (nw < nwmax) {
                if (nw >= nh - 1) {
                    nw = nh;
                } else {
                    kwtop = kbot - nw + 1;
                    i__2 = kwtop + (kwtop - 1) * h_dim1;
                    i__3 = kwtop - 1 + (kwtop - 2) * h_dim1;
                    if ((d__1 = h__[i__2].r, abs(d__1)) + (d__2 = d_imag(&h__[
                            kwtop + (kwtop - 1) * h_dim1]), abs(d__2)) > (
                            d__3 = h__[i__3].r, abs(d__3)) + (d__4 = d_imag(&
                            h__[kwtop - 1 + (kwtop - 2) * h_dim1]), abs(d__4))
                            ) {
                        ++nw;
                    }
                }
            }
            if (ndfl < 5) {
                ndec = -1;
            } else if (ndec >= 0 || nw >= nwupbd) {
                ++ndec;
                if (nw - ndec < 2) {
                    ndec = 0;
                }
                nw -= ndec;
            }

/*           ==== Aggressive early deflation: */
/*           .    split workspace under the subdiagonal into */
/*           .      - an nw-by-nw work array V in the lower */
/*           .        left-hand-corner, */
/*           .      - an NW-by-at-least-NW-but-more-is-better */
/*           .        (NW-by-NHO) horizontal work array along */
/*           .        the bottom edge, */
/*           .      - an at-least-NW-but-more-is-better (NHV-by-NW) */
/*           .        vertical work array along the left-hand-edge. */
/*           .        ==== */

            kv = *n - nw + 1;
            kt = nw + 1;
            nho = *n - nw - 1 - kt + 1;
            kwv = nw + 2;
            nve = *n - nw - kwv + 1;

/*           ==== Aggressive early deflation ==== */

            zlaqr3_(wantt, wantz, n, &ktop, &kbot, &nw, &h__[h_offset], ldh, 
                    iloz, ihiz, &z__[z_offset], ldz, &ls, &ld, &w[1], &h__[kv 
                    + h_dim1], ldh, &nho, &h__[kv + kt * h_dim1], ldh, &nve, &
                    h__[kwv + h_dim1], ldh, &work[1], lwork);

/*           ==== Adjust KBOT accounting for new deflations. ==== */

            kbot -= ld;

/*           ==== KS points to the shifts. ==== */

            ks = kbot - ls + 1;

/*           ==== Skip an expensive QR sweep if there is a (partly */
/*           .    heuristic) reason to expect that many eigenvalues */
/*           .    will deflate without it.  Here, the QR sweep is */
/*           .    skipped if many eigenvalues have just been deflated */
/*           .    or if the remaining active block is small. */

            if (ld == 0 || ld * 100 <= nw * nibble && kbot - ktop + 1 > min(
                    nmin,nwmax)) {

/*              ==== NS = nominal number of simultaneous shifts. */
/*              .    This may be lowered (slightly) if ZLAQR3 */
/*              .    did not provide that many shifts. ==== */

/* Computing MIN */
/* Computing MAX */
                i__4 = 2, i__5 = kbot - ktop;
                i__2 = min(nsmax,nsr), i__3 = max(i__4,i__5);
                ns = min(i__2,i__3);
                ns -= ns % 2;

/*              ==== If there have been no deflations */
/*              .    in a multiple of KEXSH iterations, */
/*              .    then try exceptional shifts. */
/*              .    Otherwise use shifts provided by */
/*              .    ZLAQR3 above or from the eigenvalues */
/*              .    of a trailing principal submatrix. ==== */

                if (ndfl % 6 == 0) {
                    ks = kbot - ns + 1;
                    i__2 = ks + 1;
                    for (i__ = kbot; i__ >= i__2; i__ += -2) {
                        i__3 = i__;
                        i__4 = i__ + i__ * h_dim1;
                        i__5 = i__ + (i__ - 1) * h_dim1;
                        d__3 = ((d__1 = h__[i__5].r, abs(d__1)) + (d__2 = 
                                d_imag(&h__[i__ + (i__ - 1) * h_dim1]), abs(
                                d__2))) * .75;
                        z__1.r = h__[i__4].r + d__3, z__1.i = h__[i__4].i;
                        w[i__3].r = z__1.r, w[i__3].i = z__1.i;
                        i__3 = i__ - 1;
                        i__4 = i__;
                        w[i__3].r = w[i__4].r, w[i__3].i = w[i__4].i;
/* L30: */
                    }
                } else {

/*                 ==== Got NS/2 or fewer shifts? Use ZLAQR4 or */
/*                 .    ZLAHQR on a trailing principal submatrix to */
/*                 .    get more. (Since NS.LE.NSMAX.LE.(N+6)/9, */
/*                 .    there is enough space below the subdiagonal */
/*                 .    to fit an NS-by-NS scratch array.) ==== */

                    if (kbot - ks + 1 <= ns / 2) {
                        ks = kbot - ns + 1;
                        kt = *n - ns + 1;
                        zlacpy_("A", &ns, &ns, &h__[ks + ks * h_dim1], ldh, &
                                h__[kt + h_dim1], ldh);
                        if (ns > nmin) {
                            zlaqr4_(&c_false, &c_false, &ns, &c__1, &ns, &h__[
                                    kt + h_dim1], ldh, &w[ks], &c__1, &c__1, 
                                    zdum, &c__1, &work[1], lwork, &inf);
                        } else {
                            zlahqr_(&c_false, &c_false, &ns, &c__1, &ns, &h__[
                                    kt + h_dim1], ldh, &w[ks], &c__1, &c__1, 
                                    zdum, &c__1, &inf);
                        }
                        ks += inf;

/*                    ==== In case of a rare QR failure use */
/*                    .    eigenvalues of the trailing 2-by-2 */
/*                    .    principal submatrix.  Scale to avoid */
/*                    .    overflows, underflows and subnormals. */
/*                    .    (The scale factor S can not be zero, */
/*                    .    because H(KBOT,KBOT-1) is nonzero.) ==== */

                        if (ks >= kbot) {
                            i__2 = kbot - 1 + (kbot - 1) * h_dim1;
                            i__3 = kbot + (kbot - 1) * h_dim1;
                            i__4 = kbot - 1 + kbot * h_dim1;
                            i__5 = kbot + kbot * h_dim1;
                            s = (d__1 = h__[i__2].r, abs(d__1)) + (d__2 = 
                                    d_imag(&h__[kbot - 1 + (kbot - 1) * 
                                    h_dim1]), abs(d__2)) + ((d__3 = h__[i__3]
                                    .r, abs(d__3)) + (d__4 = d_imag(&h__[kbot 
                                    + (kbot - 1) * h_dim1]), abs(d__4))) + ((
                                    d__5 = h__[i__4].r, abs(d__5)) + (d__6 = 
                                    d_imag(&h__[kbot - 1 + kbot * h_dim1]), 
                                    abs(d__6))) + ((d__7 = h__[i__5].r, abs(
                                    d__7)) + (d__8 = d_imag(&h__[kbot + kbot *
                                     h_dim1]), abs(d__8)));
                            i__2 = kbot - 1 + (kbot - 1) * h_dim1;
                            z__1.r = h__[i__2].r / s, z__1.i = h__[i__2].i / 
                                    s;
                            aa.r = z__1.r, aa.i = z__1.i;
                            i__2 = kbot + (kbot - 1) * h_dim1;
                            z__1.r = h__[i__2].r / s, z__1.i = h__[i__2].i / 
                                    s;
                            cc.r = z__1.r, cc.i = z__1.i;
                            i__2 = kbot - 1 + kbot * h_dim1;
                            z__1.r = h__[i__2].r / s, z__1.i = h__[i__2].i / 
                                    s;
                            bb.r = z__1.r, bb.i = z__1.i;
                            i__2 = kbot + kbot * h_dim1;
                            z__1.r = h__[i__2].r / s, z__1.i = h__[i__2].i / 
                                    s;
                            dd.r = z__1.r, dd.i = z__1.i;
                            z__2.r = aa.r + dd.r, z__2.i = aa.i + dd.i;
                            z__1.r = z__2.r / 2., z__1.i = z__2.i / 2.;
                            tr2.r = z__1.r, tr2.i = z__1.i;
                            z__3.r = aa.r - tr2.r, z__3.i = aa.i - tr2.i;
                            z__4.r = dd.r - tr2.r, z__4.i = dd.i - tr2.i;
                            z__2.r = z__3.r * z__4.r - z__3.i * z__4.i, 
                                    z__2.i = z__3.r * z__4.i + z__3.i * 
                                    z__4.r;
                            z__5.r = bb.r * cc.r - bb.i * cc.i, z__5.i = bb.r 
                                    * cc.i + bb.i * cc.r;
                            z__1.r = z__2.r - z__5.r, z__1.i = z__2.i - 
                                    z__5.i;
                            det.r = z__1.r, det.i = z__1.i;
                            z__2.r = -det.r, z__2.i = -det.i;
                            z_sqrt(&z__1, &z__2);
                            rtdisc.r = z__1.r, rtdisc.i = z__1.i;
                            i__2 = kbot - 1;
                            z__2.r = tr2.r + rtdisc.r, z__2.i = tr2.i + 
                                    rtdisc.i;
                            z__1.r = s * z__2.r, z__1.i = s * z__2.i;
                            w[i__2].r = z__1.r, w[i__2].i = z__1.i;
                            i__2 = kbot;
                            z__2.r = tr2.r - rtdisc.r, z__2.i = tr2.i - 
                                    rtdisc.i;
                            z__1.r = s * z__2.r, z__1.i = s * z__2.i;
                            w[i__2].r = z__1.r, w[i__2].i = z__1.i;

                            ks = kbot - 1;
                        }
                    }

                    if (kbot - ks + 1 > ns) {

/*                    ==== Sort the shifts (Helps a little) ==== */

                        sorted = FALSE_;
                        i__2 = ks + 1;
                        for (k = kbot; k >= i__2; --k) {
                            if (sorted) {
                                goto L60;
                            }
                            sorted = TRUE_;
                            i__3 = k - 1;
                            for (i__ = ks; i__ <= i__3; ++i__) {
                                i__4 = i__;
                                i__5 = i__ + 1;
                                if ((d__1 = w[i__4].r, abs(d__1)) + (d__2 = 
                                        d_imag(&w[i__]), abs(d__2)) < (d__3 = 
                                        w[i__5].r, abs(d__3)) + (d__4 = 
                                        d_imag(&w[i__ + 1]), abs(d__4))) {
                                    sorted = FALSE_;
                                    i__4 = i__;
                                    swap.r = w[i__4].r, swap.i = w[i__4].i;
                                    i__4 = i__;
                                    i__5 = i__ + 1;
                                    w[i__4].r = w[i__5].r, w[i__4].i = w[i__5]
                                            .i;
                                    i__4 = i__ + 1;
                                    w[i__4].r = swap.r, w[i__4].i = swap.i;
                                }
/* L40: */
                            }
/* L50: */
                        }
L60:
                        ;
                    }
                }

/*              ==== If there are only two shifts, then use */
/*              .    only one.  ==== */

                if (kbot - ks + 1 == 2) {
                    i__2 = kbot;
                    i__3 = kbot + kbot * h_dim1;
                    z__2.r = w[i__2].r - h__[i__3].r, z__2.i = w[i__2].i - 
                            h__[i__3].i;
                    z__1.r = z__2.r, z__1.i = z__2.i;
                    i__4 = kbot - 1;
                    i__5 = kbot + kbot * h_dim1;
                    z__4.r = w[i__4].r - h__[i__5].r, z__4.i = w[i__4].i - 
                            h__[i__5].i;
                    z__3.r = z__4.r, z__3.i = z__4.i;
                    if ((d__1 = z__1.r, abs(d__1)) + (d__2 = d_imag(&z__1), 
                            abs(d__2)) < (d__3 = z__3.r, abs(d__3)) + (d__4 = 
                            d_imag(&z__3), abs(d__4))) {
                        i__2 = kbot - 1;
                        i__3 = kbot;
                        w[i__2].r = w[i__3].r, w[i__2].i = w[i__3].i;
                    } else {
                        i__2 = kbot;
                        i__3 = kbot - 1;
                        w[i__2].r = w[i__3].r, w[i__2].i = w[i__3].i;
                    }
                }

/*              ==== Use up to NS of the the smallest magnatiude */
/*              .    shifts.  If there aren't NS shifts available, */
/*              .    then use them all, possibly dropping one to */
/*              .    make the number of shifts even. ==== */

/* Computing MIN */
                i__2 = ns, i__3 = kbot - ks + 1;
                ns = min(i__2,i__3);
                ns -= ns % 2;
                ks = kbot - ns + 1;

/*              ==== Small-bulge multi-shift QR sweep: */
/*              .    split workspace under the subdiagonal into */
/*              .    - a KDU-by-KDU work array U in the lower */
/*              .      left-hand-corner, */
/*              .    - a KDU-by-at-least-KDU-but-more-is-better */
/*              .      (KDU-by-NHo) horizontal work array WH along */
/*              .      the bottom edge, */
/*              .    - and an at-least-KDU-but-more-is-better-by-KDU */
/*              .      (NVE-by-KDU) vertical work WV arrow along */
/*              .      the left-hand-edge. ==== */

                kdu = ns * 3 - 3;
                ku = *n - kdu + 1;
                kwh = kdu + 1;
                nho = *n - kdu - 3 - (kdu + 1) + 1;
                kwv = kdu + 4;
                nve = *n - kdu - kwv + 1;

/*              ==== Small-bulge multi-shift QR sweep ==== */

                zlaqr5_(wantt, wantz, &kacc22, n, &ktop, &kbot, &ns, &w[ks], &
                        h__[h_offset], ldh, iloz, ihiz, &z__[z_offset], ldz, &
                        work[1], &c__3, &h__[ku + h_dim1], ldh, &nve, &h__[
                        kwv + h_dim1], ldh, &nho, &h__[ku + kwh * h_dim1], 
                        ldh);
            }

/*           ==== Note progress (or the lack of it). ==== */

            if (ld > 0) {
                ndfl = 1;
            } else {
                ++ndfl;
            }

/*           ==== End of main loop ==== */
/* L70: */
        }

/*        ==== Iteration limit exceeded.  Set INFO to show where */
/*        .    the problem occurred and exit. ==== */

        *info = kbot;
L80:
        ;
    }

/*     ==== Return the optimal value of LWORK. ==== */

    d__1 = (doublereal) lwkopt;
    z__1.r = d__1, z__1.i = 0.;
    work[1].r = z__1.r, work[1].i = z__1.i;

/*     ==== End of ZLAQR0 ==== */

    return 0;
} /* zlaqr0_ */