SerRelayBoard.cpp

Go to the documentation of this file.

/*
 * Copyright 2017 Fraunhofer Institute for Manufacturing Engineering and Automation (IPA)
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0

 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */


#include <math.h>
#include <cob_relayboard/SerRelayBoard.h>
#include <iostream>

//-----------------------------------------------


#define NUM_BYTE_SEND 79 //Total amount of data sent to relayboard in one message, is now passed and set as protocol-version argument in constructor

#define RS422_BAUDRATE 420000
#define RS422_RX_BUFFERSIZE 1024
#define RS422_TX_BUFFERSIZE 1024

#define RS422_TIMEOUT 0.025

#define NUM_BYTE_REC_MAX 120
#define NUM_BYTE_REC_HEADER 4 //Header bytes, which are used to identify the beginning of a new received message {0x02, 0x80, 0xD6, 0x02}
#define NUM_BYTE_REC_CHECKSUM 2 //checksum for message, that is built as the sum of all data bytes contained in the message
#define NUM_BYTE_REC 104 //Total amount of data bytes in a received message (from the relayboard)

#define NUM_BYTE_SEND_RELAYBOARD_14 88
#define NUM_BYTE_REC_RELAYBOARD_14 124


//-----------------------------------------------
SerRelayBoard::SerRelayBoard(std::string ComPort, int ProtocolVersion)
{
        m_iProtocolVersion = ProtocolVersion;
        if(m_iProtocolVersion == 1)
                m_NUM_BYTE_SEND = 50;
        else if(m_iProtocolVersion == 2)
        {       m_NUM_BYTE_SEND = 79;
                m_iTypeLCD = LCD_60CHAR_TEXT;
        }
        else if(m_iProtocolVersion == 3)
        {
                m_NUM_BYTE_SEND = NUM_BYTE_SEND_RELAYBOARD_14;
                m_iTypeLCD = RELAY_BOARD_1_4;
        }
        m_bComInit = false;
        m_sNumComPort = ComPort;

        m_iRelBoardBattVoltage = 0;
        m_iConfigRelayBoard = 0;
        m_iRelBoardKeyPad = 0xFFFF;
        m_iCmdRelayBoard = 0;
        m_iDigIn = 0;
        m_cSoftEMStop = 0;

}

//-----------------------------------------------
SerRelayBoard::~SerRelayBoard()
{
        m_SerIO.closeIO();
}

//-----------------------------------------------
int SerRelayBoard::evalRxBuffer()
{
        static int siNoMsgCnt = 0;

        int iNumByteRec = NUM_BYTE_REC;
        if(m_iTypeLCD == RELAY_BOARD_1_4)
        {
                iNumByteRec = NUM_BYTE_REC_RELAYBOARD_14;
        }

        const int c_iNrBytesMin = NUM_BYTE_REC_HEADER + iNumByteRec + NUM_BYTE_REC_CHECKSUM;
        const int c_iSizeBuffer = 4096;

        int i;
        int errorFlag = NO_ERROR;
        int iNrBytesInQueue, iNrBytesRead, iDataStart;
        unsigned char cDat[c_iSizeBuffer];
        unsigned char cTest[4] = {0x02, 0x80, 0xD6, 0x02};

        if( !m_bComInit ) return NOT_INITIALIZED;

        //enough data in queue?
        iNrBytesInQueue = m_SerIO.getSizeRXQueue();
        if(iNrBytesInQueue < c_iNrBytesMin)
        {
                //there are too less bytes in queue
                siNoMsgCnt++;
                if(siNoMsgCnt > 29)
                {
                        //std::cerr << "Relayboard: " << siNoMsgCnt << " cycles no msg received";
                        siNoMsgCnt = 0;
                        errorFlag = NO_MESSAGES;
                } else errorFlag = TOO_LESS_BYTES_IN_QUEUE;

                return errorFlag;
        }
        else
        {
                siNoMsgCnt = 0;
        }

        // search most recent data from back of queue
        iNrBytesRead = m_SerIO.readBlocking((char*)&cDat[0], iNrBytesInQueue);
        for(i = (iNrBytesRead - c_iNrBytesMin); i >= 0 ; i--)
        {
                //try to find start bytes
                if((cDat[i] == cTest[0]) && (cDat[i+1] == cTest[1]) && (cDat[i+2] == cTest[2]) && (cDat[i+3] == cTest[3]))
                {
                        iDataStart = i + 4;

                        // checksum ok?
                        if( convRecMsgToData(&cDat[iDataStart]) )
                        {
                                return errorFlag;
                        }
                        else
                        {
                                //std::cerr << "Relayboard: checksum error";
                                errorFlag = CHECKSUM_ERROR;
                                return errorFlag;
                        }
                }
        }

        return errorFlag;
}

//-----------------------------------------------
bool SerRelayBoard::init()
{
        m_SerIO.setBaudRate(RS422_BAUDRATE);
        m_SerIO.setDeviceName( m_sNumComPort.c_str() );
        m_SerIO.setBufferSize(RS422_RX_BUFFERSIZE, RS422_TX_BUFFERSIZE);
        m_SerIO.setTimeout(RS422_TIMEOUT);

        m_SerIO.openIO();

        m_bComInit = true;

        return true;
}

//-----------------------------------------------
bool SerRelayBoard::reset()
{
        m_SerIO.closeIO();
        m_bComInit = false;

        init();

        return true;
}

//-----------------------------------------------
bool SerRelayBoard::shutdown()
{
        m_SerIO.closeIO();

        m_bComInit = false;

        return true;
}


//-----------------------------------------------
bool SerRelayBoard::isEMStop()
{
        if( (m_iRelBoardStatus & 0x0001) != 0)
        {
                return true;
        }
        else
        {
                return false;
        }
}

//-----------------------------------------------
bool SerRelayBoard::isScannerStop()
{
        if( (m_iRelBoardStatus & 0x0002) != 0)
        {
                return true;
        }
        else
        {
                return false;
        }
}

//-----------------------------------------------
int SerRelayBoard::sendRequest() {
        int errorFlag = NO_ERROR;
        int iNrBytesWritten;

        unsigned char cMsg[m_NUM_BYTE_SEND];

        m_Mutex.lock();

                convDataToSendMsg(cMsg);

                m_SerIO.purgeTx();

                iNrBytesWritten = m_SerIO.writeIO((char*)cMsg, m_NUM_BYTE_SEND);

                if(iNrBytesWritten < m_NUM_BYTE_SEND) {
                        //std::cerr << "Error in sending message to Relayboard over SerialIO, lost bytes during writing" << std::endl;
                        errorFlag = GENERAL_SENDING_ERROR;
                }

        m_Mutex.unlock();

        return errorFlag;
}

int SerRelayBoard::setDigOut(int iChannel, bool bOn)
{
        switch( iChannel)
        {
        case 0:

                if(bOn) { m_iCmdRelayBoard |= CMD_SET_CHARGE_RELAY; }
                else { m_iCmdRelayBoard &= ~CMD_SET_CHARGE_RELAY; }

                break;

        case 1:

                if(bOn) { m_iCmdRelayBoard |= CMD_SET_RELAY1; }
                else { m_iCmdRelayBoard &= ~CMD_SET_RELAY1; }

                break;

        case 2:

                if(bOn) { m_iCmdRelayBoard |= CMD_SET_RELAY2; }
                else { m_iCmdRelayBoard &= ~CMD_SET_RELAY2; }

                break;

        case 3:

                if(bOn) { m_iCmdRelayBoard |= CMD_SET_RELAY3; }
                else { m_iCmdRelayBoard &= ~CMD_SET_RELAY3; }

                break;

        case 4:

                if(bOn) { m_iCmdRelayBoard |= CMD_SET_RELAY4; }
                else { m_iCmdRelayBoard &= ~CMD_SET_RELAY4; }

                break;

        case 5:

                if(bOn) { m_iCmdRelayBoard |= CMD_SET_RELAY5; }
                else { m_iCmdRelayBoard &= ~CMD_SET_RELAY5; }

                break;

        case 6:

                if(bOn) { m_iCmdRelayBoard |= CMD_SET_RELAY6; }
                else { m_iCmdRelayBoard &= ~CMD_SET_RELAY6; }

                break;

        default:

                return -1;
        }

        return 0;
}
//-----------------------------------------------
int SerRelayBoard::getAnalogIn(int* piAnalogIn)
{
        piAnalogIn[0] = m_iChargeCurrent;
        piAnalogIn[1] = m_iRelBoardBattVoltage;
        piAnalogIn[2] = m_iRelBoardTempSensor;
        piAnalogIn[3] = m_iRelBoardKeyPad;
        piAnalogIn[4] = m_iRelBoardAnalogIn[0];
        piAnalogIn[5] = m_iRelBoardAnalogIn[1];
        piAnalogIn[6] = m_iRelBoardAnalogIn[2];
        piAnalogIn[7] = m_iRelBoardAnalogIn[3];

        return 0;
}

//-----------------------------------------------
int SerRelayBoard::getDigIn()
{
        return m_iDigIn;
}

void SerRelayBoard::convDataToSendMsg(unsigned char cMsg[])
{
        int i;
        static int j = 0;
        int iCnt = 0;
        int iChkSum = 0;

        if (m_cSoftEMStop & 0x02)
        {
                if (j == 1)
                {
                        m_cSoftEMStop &= 0xFD;
                        j = 0;
                }
                else if (j == 0)
                {
                        j = 1;
                }
        }

        cMsg[iCnt++] = CMD_RELAISBOARD_GET_DATA;

        cMsg[iCnt++] = m_iConfigRelayBoard >> 8;
        cMsg[iCnt++] = m_iConfigRelayBoard;

        cMsg[iCnt++] = m_iCmdRelayBoard >> 8;
        cMsg[iCnt++] = m_iCmdRelayBoard;

        cMsg[iCnt++] = m_iIOBoardDigOut >> 8;
        cMsg[iCnt++] = m_iIOBoardDigOut;

        cMsg[iCnt++] = m_iVelCmdMotRightEncS >> 24;
        cMsg[iCnt++] = m_iVelCmdMotRightEncS >> 16;
        cMsg[iCnt++] = m_iVelCmdMotRightEncS >> 8;
        cMsg[iCnt++] = m_iVelCmdMotRightEncS;

        cMsg[iCnt++] = m_iVelCmdMotLeftEncS >> 24;
        cMsg[iCnt++] = m_iVelCmdMotLeftEncS >> 16;
        cMsg[iCnt++] = m_iVelCmdMotLeftEncS >> 8;
        cMsg[iCnt++] = m_iVelCmdMotLeftEncS;

        if(m_iTypeLCD == RELAY_BOARD_1_4)
        {
                cMsg[iCnt++] = m_iVelCmdMotRearRightEncS >> 24;
                cMsg[iCnt++] = m_iVelCmdMotRearRightEncS >> 16;
                cMsg[iCnt++] = m_iVelCmdMotRearRightEncS >> 8;
                cMsg[iCnt++] = m_iVelCmdMotRearRightEncS;

                cMsg[iCnt++] = m_iVelCmdMotRearLeftEncS >> 24;
                cMsg[iCnt++] = m_iVelCmdMotRearLeftEncS >> 16;
                cMsg[iCnt++] = m_iVelCmdMotRearLeftEncS >> 8;
                cMsg[iCnt++] = m_iVelCmdMotRearLeftEncS;
        }

        cMsg[iCnt++] = m_iUSBoardSensorActive >> 8;
        cMsg[iCnt++] = m_iUSBoardSensorActive;

        if(m_iTypeLCD == LCD_20CHAR_TEXT)
        {
                for(i = 0; i < 20; i++)
                {
                        cMsg[iCnt++] = m_cTextDisplay[i];
                }

                // fill remaining msg with 0's
                do
                {
                        cMsg[iCnt++] = 0;
                }
                while(iCnt < (m_NUM_BYTE_SEND - 2));
        }
        else
        {
                for(i = 0; i < 60; i++)
                {
                        cMsg[iCnt++] = m_cTextDisplay[i];
                }
        }

        if(m_iTypeLCD == RELAY_BOARD_1_4)
        {
                cMsg[iCnt++] = m_cSoftEMStop;
        }
        // calc checksum
        for(i = 0; i < (m_NUM_BYTE_SEND - 2); i++)
        {
                iChkSum %= 0xFF00;
                iChkSum += cMsg[i];
        }

        cMsg[m_NUM_BYTE_SEND - 2] = iChkSum >> 8;
        cMsg[m_NUM_BYTE_SEND - 1] = iChkSum;

        // reset flags
        m_iCmdRelayBoard &= ~CMD_RESET_POS_CNT;

}


//-----------------------------------------------
/*void SerRelayBoard::convDataToSendMsg(unsigned char cMsg[])
{
        int i;
        int iCnt = 0;
        int iChkSum = 0;

        cMsg[iCnt++] = 1;//CMD_RELAISBOARD_GET_DATA;

        cMsg[iCnt++] = m_iConfigRelayBoard >> 8;
        cMsg[iCnt++] = m_iConfigRelayBoard;

        cMsg[iCnt++] = m_iCmdRelayBoard >> 8;
        cMsg[iCnt++] = m_iCmdRelayBoard;

        // fill remaining msg with 0's
        do
        {
                cMsg[iCnt++] = 0;
        }
        while(iCnt < (m_NUM_BYTE_SEND - 2));

        // calc checksum: summation of all bytes in the message
        for(i = 0; i < (m_NUM_BYTE_SEND - 2); i++)
        {
                iChkSum += cMsg[i];
        }

        cMsg[m_NUM_BYTE_SEND - 2] = iChkSum >> 8;
        cMsg[m_NUM_BYTE_SEND - 1] = iChkSum;

        // reset flags
        m_iCmdRelayBoard &= ~CMD_RESET_POS_CNT;
}
*/
//-----------------------------------------------
bool SerRelayBoard::convRecMsgToData(unsigned char cMsg[])
{

        int iNumByteRec = NUM_BYTE_REC;
        if(m_iTypeLCD == LCD_20CHAR_TEXT)
        {
                iNumByteRec = NUM_BYTE_REC;
        }
        if(m_iTypeLCD == LCD_60CHAR_TEXT)
        {
                iNumByteRec = NUM_BYTE_REC;
        }
        if(m_iTypeLCD == RELAY_BOARD_1_4)
        {
                iNumByteRec = NUM_BYTE_REC_RELAYBOARD_14;
        }

        const int c_iStartCheckSum = iNumByteRec;

        int i;
        unsigned int iTxCheckSum;
        unsigned int iCheckSum;

        m_Mutex.lock();

        // test checksum: checksum should be sum of all bytes
        iTxCheckSum = (cMsg[c_iStartCheckSum + 1] << 8) | cMsg[c_iStartCheckSum];

        iCheckSum = 0;
        for(i = 0; i < c_iStartCheckSum; i++)
        {
                iCheckSum %= 0xFF00;
                iCheckSum += cMsg[i];
        }

        if(iCheckSum != iTxCheckSum)
        {
                return false;
        }

        // convert data
        int iCnt = 0;

        //RelayboardStatus bytes contain EM-Stop and Scanner-Stop bits
        m_iRelBoardStatus = (cMsg[iCnt + 1] << 8) | cMsg[iCnt];
        iCnt += 2;

        //unused at the moment
        m_iChargeCurrent = (cMsg[iCnt + 1] << 8) | cMsg[iCnt];
        iCnt += 2;

        //unused at the moment
        m_iRelBoardBattVoltage = (cMsg[iCnt + 1] << 8) | cMsg[iCnt];
        iCnt += 2;

        //unused at the moment
        m_iRelBoardKeyPad = (cMsg[iCnt + 1] << 8) | cMsg[iCnt];
        iCnt += 2;

        //unused at the moment
        for(i = 0; i < 4; i++)
        {
                m_iRelBoardAnalogIn[i] = (cMsg[iCnt + 1] << 8) | cMsg[iCnt];
                iCnt += 2;
        }

        //unused at the moment
        m_iRelBoardTempSensor = (cMsg[iCnt + 1] << 8) | cMsg[iCnt];
        iCnt += 2;

        //Digital Inputs
        //unused at the moment
        m_iDigIn = (cMsg[iCnt + 1] << 8) | cMsg[iCnt];
        iCnt += 2;

        //Throw away rest of the message, it was used for earlier purposes

        m_Mutex.unlock();
        return true;
}