_AckermannDriveStamped.py

Go to the documentation of this file.

"""autogenerated by genpy from ackermann_msgs/AckermannDriveStamped.msg. Do not edit."""
import sys
python3 = True if sys.hexversion > 0x03000000 else False
import genpy
import struct

import ackermann_msgs.msg
import std_msgs.msg

class AckermannDriveStamped(genpy.Message):
  _md5sum = "1fd5d7f58889cefd44d29f6653240d0c"
  _type = "ackermann_msgs/AckermannDriveStamped"
  _has_header = True #flag to mark the presence of a Header object
  _full_text = """## Time stamped drive command for robots with Ackermann steering.
#  $Id$

Header          header
AckermannDrive  drive

================================================================================
MSG: std_msgs/Header
# Standard metadata for higher-level stamped data types.
# This is generally used to communicate timestamped data 
# in a particular coordinate frame.
# 
# sequence ID: consecutively increasing ID 
uint32 seq
#Two-integer timestamp that is expressed as:
# * stamp.secs: seconds (stamp_secs) since epoch
# * stamp.nsecs: nanoseconds since stamp_secs
# time-handling sugar is provided by the client library
time stamp
#Frame this data is associated with
# 0: no frame
# 1: global frame
string frame_id

================================================================================
MSG: ackermann_msgs/AckermannDrive
## Driving command for a car-like vehicle using Ackermann steering.
#  $Id$

# Assumes Ackermann front-wheel steering. The left and right front
# wheels are generally at different angles. To simplify, the commanded
# angle corresponds to the yaw of a virtual wheel located at the
# center of the front axle, like on a tricycle.  Positive yaw is to
# the left. (This is *not* the angle of the steering wheel inside the
# passenger compartment.)
#
# Zero steering angle velocity means change the steering angle as
# quickly as possible. Positive velocity indicates a desired absolute
# rate of change either left or right. The controller tries not to
# exceed this limit in either direction, but sometimes it might.
#
float32 steering_angle          # desired virtual angle (radians)
float32 steering_angle_velocity # desired rate of change (radians/s)

# Drive at requested speed, acceleration and jerk (the 1st, 2nd and
# 3rd derivatives of position). All are measured at the vehicle's
# center of rotation, typically the center of the rear axle. The
# controller tries not to exceed these limits in either direction, but
# sometimes it might.
#
# Speed is the desired scalar magnitude of the velocity vector.
# Direction is forward unless the sign is negative, indicating reverse.
#
# Zero acceleration means change speed as quickly as
# possible. Positive acceleration indicates a desired absolute
# magnitude; that includes deceleration.
#
# Zero jerk means change acceleration as quickly as possible. Positive
# jerk indicates a desired absolute rate of acceleration change in
# either direction (increasing or decreasing).
#
float32 speed                   # desired forward speed (m/s)
float32 acceleration            # desired acceleration (m/s^2)
float32 jerk                    # desired jerk (m/s^3)

"""
  __slots__ = ['header','drive']
  _slot_types = ['std_msgs/Header','ackermann_msgs/AckermannDrive']

  def __init__(self, *args, **kwds):
    """
    Constructor. Any message fields that are implicitly/explicitly
    set to None will be assigned a default value. The recommend
    use is keyword arguments as this is more robust to future message
    changes.  You cannot mix in-order arguments and keyword arguments.

    The available fields are:
       header,drive

    :param args: complete set of field values, in .msg order
    :param kwds: use keyword arguments corresponding to message field names
    to set specific fields.
    """
    if args or kwds:
      super(AckermannDriveStamped, self).__init__(*args, **kwds)
      #message fields cannot be None, assign default values for those that are
      if self.header is None:
        self.header = std_msgs.msg.Header()
      if self.drive is None:
        self.drive = ackermann_msgs.msg.AckermannDrive()
    else:
      self.header = std_msgs.msg.Header()
      self.drive = ackermann_msgs.msg.AckermannDrive()

  def _get_types(self):
    """
    internal API method
    """
    return self._slot_types

  def serialize(self, buff):
    """
    serialize message into buffer
    :param buff: buffer, ``StringIO``
    """
    try:
      _x = self
      buff.write(_struct_3I.pack(_x.header.seq, _x.header.stamp.secs, _x.header.stamp.nsecs))
      _x = self.header.frame_id
      length = len(_x)
      if python3 or type(_x) == unicode:
        _x = _x.encode('utf-8')
        length = len(_x)
      buff.write(struct.pack('<I%ss'%length, length, _x))
      _x = self
      buff.write(_struct_5f.pack(_x.drive.steering_angle, _x.drive.steering_angle_velocity, _x.drive.speed, _x.drive.acceleration, _x.drive.jerk))
    except struct.error as se: self._check_types(struct.error("%s: '%s' when writing '%s'" % (type(se), str(se), str(_x))))
    except TypeError as te: self._check_types(ValueError("%s: '%s' when writing '%s'" % (type(te), str(te), str(_x))))

  def deserialize(self, str):
    """
    unpack serialized message in str into this message instance
    :param str: byte array of serialized message, ``str``
    """
    try:
      if self.header is None:
        self.header = std_msgs.msg.Header()
      if self.drive is None:
        self.drive = ackermann_msgs.msg.AckermannDrive()
      end = 0
      _x = self
      start = end
      end += 12
      (_x.header.seq, _x.header.stamp.secs, _x.header.stamp.nsecs,) = _struct_3I.unpack(str[start:end])
      start = end
      end += 4
      (length,) = _struct_I.unpack(str[start:end])
      start = end
      end += length
      if python3:
        self.header.frame_id = str[start:end].decode('utf-8')
      else:
        self.header.frame_id = str[start:end]
      _x = self
      start = end
      end += 20
      (_x.drive.steering_angle, _x.drive.steering_angle_velocity, _x.drive.speed, _x.drive.acceleration, _x.drive.jerk,) = _struct_5f.unpack(str[start:end])
      return self
    except struct.error as e:
      raise genpy.DeserializationError(e) #most likely buffer underfill


  def serialize_numpy(self, buff, numpy):
    """
    serialize message with numpy array types into buffer
    :param buff: buffer, ``StringIO``
    :param numpy: numpy python module
    """
    try:
      _x = self
      buff.write(_struct_3I.pack(_x.header.seq, _x.header.stamp.secs, _x.header.stamp.nsecs))
      _x = self.header.frame_id
      length = len(_x)
      if python3 or type(_x) == unicode:
        _x = _x.encode('utf-8')
        length = len(_x)
      buff.write(struct.pack('<I%ss'%length, length, _x))
      _x = self
      buff.write(_struct_5f.pack(_x.drive.steering_angle, _x.drive.steering_angle_velocity, _x.drive.speed, _x.drive.acceleration, _x.drive.jerk))
    except struct.error as se: self._check_types(struct.error("%s: '%s' when writing '%s'" % (type(se), str(se), str(_x))))
    except TypeError as te: self._check_types(ValueError("%s: '%s' when writing '%s'" % (type(te), str(te), str(_x))))

  def deserialize_numpy(self, str, numpy):
    """
    unpack serialized message in str into this message instance using numpy for array types
    :param str: byte array of serialized message, ``str``
    :param numpy: numpy python module
    """
    try:
      if self.header is None:
        self.header = std_msgs.msg.Header()
      if self.drive is None:
        self.drive = ackermann_msgs.msg.AckermannDrive()
      end = 0
      _x = self
      start = end
      end += 12
      (_x.header.seq, _x.header.stamp.secs, _x.header.stamp.nsecs,) = _struct_3I.unpack(str[start:end])
      start = end
      end += 4
      (length,) = _struct_I.unpack(str[start:end])
      start = end
      end += length
      if python3:
        self.header.frame_id = str[start:end].decode('utf-8')
      else:
        self.header.frame_id = str[start:end]
      _x = self
      start = end
      end += 20
      (_x.drive.steering_angle, _x.drive.steering_angle_velocity, _x.drive.speed, _x.drive.acceleration, _x.drive.jerk,) = _struct_5f.unpack(str[start:end])
      return self
    except struct.error as e:
      raise genpy.DeserializationError(e) #most likely buffer underfill

_struct_I = genpy.struct_I
_struct_3I = struct.Struct("<3I")
_struct_5f = struct.Struct("<5f")