ClosedDoorDetectorConfig.py

Go to the documentation of this file.

## *********************************************************
## 
## File autogenerated for the iri_door_detector package 
## by the dynamic_reconfigure package.
## Please do not edit.
## 
## ********************************************************/

##**********************************************************
## Software License Agreement (BSD License)
##
##  Copyright (c) 2008, Willow Garage, Inc.
##  All rights reserved.
##
##  Redistribution and use in source and binary forms, with or without
##  modification, are permitted provided that the following conditions
##  are met:
##
##   * Redistributions of source code must retain the above copyright
##     notice, this list of conditions and the following disclaimer.
##   * Redistributions in binary form must reproduce the above
##     copyright notice, this list of conditions and the following
##     disclaimer in the documentation and/or other materials provided
##     with the distribution.
##   * Neither the name of the Willow Garage nor the names of its
##     contributors may be used to endorse or promote products derived
##     from this software without specific prior written permission.
##
##  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
##  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
##  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
##  FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
##  COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
##  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
##  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
##  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
##  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
##  LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
##  ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
##  POSSIBILITY OF SUCH DAMAGE.
##**********************************************************/

config_description = [{'srcline': 42, 'description': 'Minimum door width', 'max': 1500, 'cconsttype': 'const int', 'ctype': 'int', 'srcfile': '../cfg/closed_door_detector_alg_config.cfg', 'name': 'min_door_width', 'edit_method': '', 'default': 300, 'level': 0, 'min': 50, 'type': 'int'}, {'srcline': 43, 'description': 'Maximum door width', 'max': 1500, 'cconsttype': 'const int', 'ctype': 'int', 'srcfile': '../cfg/closed_door_detector_alg_config.cfg', 'name': 'max_door_width', 'edit_method': '', 'default': 750, 'level': 0, 'min': 50, 'type': 'int'}, {'srcline': 44, 'description': 'Minimum door height', 'max': 1500, 'cconsttype': 'const int', 'ctype': 'int', 'srcfile': '../cfg/closed_door_detector_alg_config.cfg', 'name': 'min_door_height', 'edit_method': '', 'default': 850, 'level': 0, 'min': 50, 'type': 'int'}, {'srcline': 45, 'description': 'Maximum door height', 'max': 1500, 'cconsttype': 'const int', 'ctype': 'int', 'srcfile': '../cfg/closed_door_detector_alg_config.cfg', 'name': 'max_door_height', 'edit_method': '', 'default': 1200, 'level': 0, 'min': 50, 'type': 'int'}, {'srcline': 46, 'description': 'Percentage of door width', 'max': 20, 'cconsttype': 'const int', 'ctype': 'int', 'srcfile': '../cfg/closed_door_detector_alg_config.cfg', 'name': 'handle_width', 'edit_method': '', 'default': 12, 'level': 0, 'min': 1, 'type': 'int'}, {'srcline': 47, 'description': 'Percentage of door height', 'max': 20, 'cconsttype': 'const int', 'ctype': 'int', 'srcfile': '../cfg/closed_door_detector_alg_config.cfg', 'name': 'handle_height', 'edit_method': '', 'default': 6, 'level': 0, 'min': 1, 'type': 'int'}, {'srcline': 48, 'description': 'Distance from door edge', 'max': 50, 'cconsttype': 'const int', 'ctype': 'int', 'srcfile': '../cfg/closed_door_detector_alg_config.cfg', 'name': 'handle_location', 'edit_method': '', 'default': 15, 'level': 0, 'min': 0, 'type': 'int'}, {'srcline': 49, 'description': 'Blob Threshold', 'max': 400, 'cconsttype': 'const int', 'ctype': 'int', 'srcfile': '../cfg/closed_door_detector_alg_config.cfg', 'name': 'allowed_blobs', 'edit_method': '', 'default': 130, 'level': 0, 'min': 0, 'type': 'int'}, {'srcline': 50, 'description': 'Edge Fidelity of Segmentation', 'max': 255, 'cconsttype': 'const int', 'ctype': 'int', 'srcfile': '../cfg/closed_door_detector_alg_config.cfg', 'name': 'segment_fidelity', 'edit_method': '', 'default': 40, 'level': 0, 'min': 0, 'type': 'int'}, {'srcline': 51, 'description': 'Segment Area', 'max': 255, 'cconsttype': 'const int', 'ctype': 'int', 'srcfile': '../cfg/closed_door_detector_alg_config.cfg', 'name': 'segment_size', 'edit_method': '', 'default': 40, 'level': 0, 'min': 0, 'type': 'int'}, {'srcline': 52, 'description': 'Show Images for Debugging', 'max': 5, 'cconsttype': 'const int', 'ctype': 'int', 'srcfile': '../cfg/closed_door_detector_alg_config.cfg', 'name': 'debugging_images', 'edit_method': '', 'default': 0, 'level': 0, 'min': 0, 'type': 'int'}, {'srcline': 53, 'description': 'Run without simulation', 'max': True, 'cconsttype': 'const bool', 'ctype': 'bool', 'srcfile': '../cfg/closed_door_detector_alg_config.cfg', 'name': 'no_simulator', 'edit_method': '', 'default': True, 'level': 0, 'min': False, 'type': 'bool'}, {'srcline': 54, 'description': 'Show Door Size Calibrator', 'max': True, 'cconsttype': 'const bool', 'ctype': 'bool', 'srcfile': '../cfg/closed_door_detector_alg_config.cfg', 'name': 'DSC', 'edit_method': '', 'default': False, 'level': 0, 'min': False, 'type': 'bool'}, {'srcline': 55, 'description': 'Show Handle Mask', 'max': True, 'cconsttype': 'const bool', 'ctype': 'bool', 'srcfile': '../cfg/closed_door_detector_alg_config.cfg', 'name': 'SHM', 'edit_method': '', 'default': False, 'level': 0, 'min': False, 'type': 'bool'}, {'srcline': 56, 'description': 'Show Virtual Points', 'max': True, 'cconsttype': 'const bool', 'ctype': 'bool', 'srcfile': '../cfg/closed_door_detector_alg_config.cfg', 'name': 'SVP', 'edit_method': '', 'default': False, 'level': 0, 'min': False, 'type': 'bool'}, {'srcline': 57, 'description': 'Show Flatness Test', 'max': True, 'cconsttype': 'const bool', 'ctype': 'bool', 'srcfile': '../cfg/closed_door_detector_alg_config.cfg', 'name': 'SFT', 'edit_method': '', 'default': False, 'level': 0, 'min': False, 'type': 'bool'}, {'srcline': 58, 'description': 'Apply Sensor range filter', 'max': True, 'cconsttype': 'const bool', 'ctype': 'bool', 'srcfile': '../cfg/closed_door_detector_alg_config.cfg', 'name': 'Range_filter', 'edit_method': '', 'default': True, 'level': 0, 'min': False, 'type': 'bool'}, {'srcline': 59, 'description': 'Apply Perspective filter', 'max': True, 'cconsttype': 'const bool', 'ctype': 'bool', 'srcfile': '../cfg/closed_door_detector_alg_config.cfg', 'name': 'Persp_filter', 'edit_method': '', 'default': True, 'level': 0, 'min': False, 'type': 'bool'}, {'srcline': 60, 'description': 'Apply Geometry filter', 'max': True, 'cconsttype': 'const bool', 'ctype': 'bool', 'srcfile': '../cfg/closed_door_detector_alg_config.cfg', 'name': 'Geom_filter', 'edit_method': '', 'default': True, 'level': 0, 'min': False, 'type': 'bool'}, {'srcline': 61, 'description': 'Apply Size filter', 'max': True, 'cconsttype': 'const bool', 'ctype': 'bool', 'srcfile': '../cfg/closed_door_detector_alg_config.cfg', 'name': 'Size_filter', 'edit_method': '', 'default': True, 'level': 0, 'min': False, 'type': 'bool'}, {'srcline': 62, 'description': 'Apply Aspect ratio filter', 'max': True, 'cconsttype': 'const bool', 'ctype': 'bool', 'srcfile': '../cfg/closed_door_detector_alg_config.cfg', 'name': 'Aspect_filter', 'edit_method': '', 'default': True, 'level': 0, 'min': False, 'type': 'bool'}]

min = {}
max = {}
defaults = {}
level = {}
type = {}
all_level = 0

for param in config_description:
    min[param['name']] = param['min']
    max[param['name']] = param['max']
    defaults[param['name']] = param['default']
    level[param['name']] = param['level']
    type[param['name']] = param['type']
    all_level = all_level | param['level']