This is the complete list of members for
BMA180, including all inherited members.
accel_range enum name | BMA180Parameters | |
accel_range_ | BMA180Parameters | [protected] |
AccelX_ | BMA180 | |
AccelY_ | BMA180 | |
AccelZ_ | BMA180 | |
ADDRESS_ACCLX_MSB | BMA180 | [protected, static] |
ADDRESS_ACCLXYZ | BMA180 | [protected, static] |
ADDRESS_ACCLY_LSB | BMA180 | [protected, static] |
ADDRESS_ACCLY_MSB | BMA180 | [protected, static] |
ADDRESS_ACCLZ_LSB | BMA180 | [protected, static] |
ADDRESS_ACCLZ_MSB | BMA180 | [protected, static] |
ADDRESS_BW_TCS | BMA180 | [protected, static] |
ADDRESS_CD1 | BMA180 | [protected, static] |
ADDRESS_CD2 | BMA180 | [protected, static] |
ADDRESS_CTRL_REG4 | BMA180 | [protected, static] |
ADDRESS_CTRLREG0 | BMA180 | [protected, static] |
ADDRESS_CTRLREG1 | BMA180 | [protected, static] |
ADDRESS_CTRLREG2 | BMA180 | [protected, static] |
ADDRESS_EE_CD1 | BMA180 | [protected, static] |
ADDRESS_EE_CD2 | BMA180 | [protected, static] |
ADDRESS_EE_GAIN_T | BMA180 | [protected, static] |
ADDRESS_EE_GAIN_X | BMA180 | [protected, static] |
ADDRESS_EE_GAIN_Y | BMA180 | [protected, static] |
ADDRESS_EE_GAIN_Z | BMA180 | [protected, static] |
ADDRESS_EE_OFFSET_LSB1 | BMA180 | [protected, static] |
ADDRESS_EE_OFFSET_LSB2 | BMA180 | [protected, static] |
ADDRESS_EE_OFFSET_T | BMA180 | [protected, static] |
ADDRESS_EE_OFFSET_X | BMA180 | [protected, static] |
ADDRESS_EE_OFFSET_Y | BMA180 | [protected, static] |
ADDRESS_EE_OFFSET_Z | BMA180 | [protected, static] |
ADDRESS_GAIN_T | BMA180 | [protected, static] |
ADDRESS_GAIN_X | BMA180 | [protected, static] |
ADDRESS_GAIN_Y | BMA180 | [protected, static] |
ADDRESS_GAIN_Z | BMA180 | [protected, static] |
ADDRESS_HIGH_DUR | BMA180 | [protected, static] |
ADDRESS_OFFSET_LSB1 | BMA180 | [protected, static] |
ADDRESS_OFFSET_LSB2 | BMA180 | [protected, static] |
ADDRESS_OFFSET_T | BMA180 | [protected, static] |
ADDRESS_OFFSET_X | BMA180 | [protected, static] |
ADDRESS_OFFSET_Y | BMA180 | [protected, static] |
ADDRESS_OFFSET_Z | BMA180 | [protected, static] |
ADDRESS_SOFTRESET | BMA180 | [protected, static] |
ADDRESS_STATUS_REG1 | BMA180 | [protected, static] |
ADDRESS_STATUS_REG2 | BMA180 | [protected, static] |
ADDRESS_STATUS_REG3 | BMA180 | [protected, static] |
ADDRESS_STATUS_REG4 | BMA180 | [protected, static] |
ADDRESS_TEMPERATURE | BMA180 | [protected, static] |
ADDRESS_VER | BMA180 | [protected, static] |
bandwidth enum name | BMA180Parameters | |
bandwidth_ | BMA180Parameters | [protected] |
BMA180(bosch_hardware_interface *hw) | BMA180 | |
BMA180Parameters() | BMA180Parameters | |
bw | BMA180 | [protected, static] |
BW_10 enum value | BMA180Parameters | |
BW_1200 enum value | BMA180Parameters | |
BW_150 enum value | BMA180Parameters | |
BW_20 enum value | BMA180Parameters | |
BW_300 enum value | BMA180Parameters | |
BW_40 enum value | BMA180Parameters | |
BW_600 enum value | BMA180Parameters | |
BW_75 enum value | BMA180Parameters | |
BW_BAND_PASS enum value | BMA180Parameters | |
BW_HIGH_PASS enum value | BMA180Parameters | |
Calibrate() | BMA180 | |
changeAccelRange() | BMA180 | |
changeBandwidth() | BMA180 | |
CMD_DISABLE_I2C | BMA180 | [protected, static] |
CMD_SOFTRESET | BMA180 | [protected, static] |
CoarseCalibrate() | BMA180 | |
DisableI2C() | BMA180 | |
ee_w | BMA180 | [protected, static] |
en_offset_x | BMA180 | [protected, static] |
en_offset_y | BMA180 | [protected, static] |
en_offset_z | BMA180 | [protected, static] |
EnableWriting() | BMA180 | |
flags_ | bosch_drivers_common::Parameters | |
frequency_ | bosch_drivers_common::Parameters | |
FullCalibration() | BMA180 | |
getAccelData() | BMA180 | |
getAccelX() | BMA180 | |
getAccelY() | BMA180 | |
getAccelZ() | BMA180 | |
getDeviceAddress() | BMA180 | [virtual] |
getFlags() | BMA180Parameters | [virtual] |
getFrequency() | BMA180Parameters | [virtual] |
getPin() | BMA180Parameters | [virtual] |
getProtocol() | BMA180Parameters | [virtual] |
getSensitivity() | BMA180Parameters | |
getSlaveAddressBit() | BMA180Parameters | |
getStaticPitch() | BMA180 | |
getStaticRoll() | BMA180 | |
getTemperature() | BMA180 | |
hardware_ | bosch_drivers_common::sensor_driver | [protected] |
initialize() | BMA180 | |
offset_finetuning | BMA180 | [protected, static] |
offset_st_s | BMA180 | [protected, static] |
offsetsEnabled_ | BMA180Parameters | [protected] |
Parameters() | bosch_drivers_common::Parameters | |
pin_ | bosch_drivers_common::Parameters | |
protocol_ | bosch_drivers_common::Parameters | |
range | BMA180 | [protected, static] |
RANGE_1 enum value | BMA180Parameters | |
RANGE_16 enum value | BMA180Parameters | |
RANGE_1_5 enum value | BMA180Parameters | |
RANGE_2 enum value | BMA180Parameters | |
RANGE_3 enum value | BMA180Parameters | |
RANGE_4 enum value | BMA180Parameters | |
RANGE_8 enum value | BMA180Parameters | |
readReg(uint8_t reg, uint8_t *value) | BMA180 | [protected] |
readSensorData(uint8_t reg, uint8_t *value, uint8_t num_bytes) | BMA180 | [protected] |
sensitivity_ | BMA180Parameters | [protected] |
sensor_driver(bosch_hardware_interface *hw) | bosch_drivers_common::sensor_driver | |
setAccelRange(accel_range new_range) | BMA180Parameters | |
setBandwidth(bandwidth bw) | BMA180Parameters | |
setByteOrder(uint8_t value) | BMA180Parameters | [protected] |
setEnOffsetBit(uint8_t bit) | BMA180 | |
setFrequency(int frequency) | BMA180Parameters | [virtual] |
setPin(uint8_t pin) | BMA180Parameters | [virtual] |
setPreCalOffsets(bool choice) | BMA180Parameters | |
setProtocol(interface_protocol protocol) | BMA180Parameters | |
bosch_drivers_common::Parameters::setProtocol(interface_protocol protocol_name)=0 | bosch_drivers_common::Parameters | [pure virtual] |
setSlaveAddressBit(bool choice) | BMA180Parameters | |
setSpiMode(uint8_t mode) | BMA180Parameters | [protected] |
SLAVE_ADDRESS0 | BMA180 | [protected, static] |
SLAVE_ADDRESS1 | BMA180 | [protected, static] |
slave_address_bit_ | BMA180Parameters | [protected] |
softReset() | BMA180 | |
StaticPitch_ | BMA180 | |
StaticRoll_ | BMA180 | |
takeMeasurement() | BMA180 | |
Temperature_ | BMA180 | |
TempSlope_ | BMA180 | |
TwoStepCoarseCalibrate() | BMA180 | |
useFilter_ | BMA180Parameters | [protected] |
writeToReg(uint8_t reg, uint8_t value) | BMA180 | [protected] |
writeToRegAndVerify(uint8_t reg, uint8_t value, uint8_t expected_value) | BMA180 | [protected] |
~BMA180() | BMA180 | |
~BMA180Parameters() | BMA180Parameters | |
~Parameters() | bosch_drivers_common::Parameters | [virtual] |
~sensor_driver() | bosch_drivers_common::sensor_driver | [virtual] |