$search

sub20_ADC.cpp

Go to the documentation of this file.

/*
 * Copyright (c) 2011, Robert Bosch LLC
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 *     * Redistributions of source code must retain the above copyright
 *       notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright
 *       notice, this list of conditions and the following disclaimer in the
 *       documentation and/or other materials provided with the distribution.
 *     * Neither the name of Robert Bosch LLC nor the names of its
 *       contributors may be used to endorse or promote products derived from
 *       this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */
/*
 * adc_sub20.cpp
 *
 *  Created on: Jun 12, 2011
 *      Author: Nikhil Deshpande, Robert Bosch LLC|
 */

#include <iostream>
#include <string>
#include "ros/ros.h"
#include <sstream>
#include "ros/time.h"
#include <math.h>
#include "adc_sub20/sub20_ADC.h"
#include <vector>
#include <map>

Sub20_ADC::Sub20_ADC(std::string ADC_MUXCONFIG, double dRate_Hz, double dVRef):
        bSubDeviceOpen        (false),
        bSubDeviceConfigured  (false)
{
        // TODO Auto-generated constructor stub
        int               iADCErr;              //Error code for std Sub20 API
        int               iADC_cfg_set;         //Set ADC config
        std::stringstream ss_errmsg;
        std::string       ss_config;
        sub_device        sub20dev;
        sub_handle        sub20handle;
        OneSub20Config    OneSub20Configuration;

        ROS_INFO("--------------------------------------");
        initADC_MUX_MAP();                              // Initialize the ADC_MUX mapping for String Values of enum entries
        // Open connected Sub20 Devices
        sub20dev = 0;
        sub20dev = sub_find_devices(sub20dev);
        while( sub20dev != 0 ) {
            sub20handle = sub_open( sub20dev );
            // on success, sub_open returns non-zero handle
            if (sub20handle > 0) {
                subhndl = sub20handle;
                // Configure Sub20 device
                std::cout << "---Initializing ADC Interface---" << std::endl;
                // Read and set current ADC configuration
                iADC_cfg_set = ADC_ENABLE;
                ss_config = "ADC_ENABLE | ";
                if((dVRef==VCC_5V)||(dVRef==VCC_3V3)){
                        iADC_cfg_set |= ADC_REF_VCC;
                        ss_config += "ADC_REF_VCC";
                } else {
                        iADC_cfg_set |= ADC_REF_2_56;
                        ss_config += "ADC_REF_2_56";
                }
                //Configure ADC
                iADCErr = sub_adc_config( sub20handle, iADC_cfg_set);
                if(iADCErr == 0) {
                        std::cout << "ADC Configuration   : " << iADC_cfg_set << " successfully stored \n";
                        std::cout << "Configuration Details   : " << std::endl;
                        std::cout << "          Register Settings               : " << ss_config << std::endl;
                        std::cout << "          ADC Readings Rate (/sec)        : " << dRate_Hz << std::endl;

                        //ADC Read Configuration
                        get_ADC_MuxCode(ADC_MUXCONFIG, OneSub20Configuration.sub20_ADC_Config.sub20_ADC_MUX, OneSub20Configuration.sub20_ADC_Config.sub20_ADC_TYPE, &OneSub20Configuration.sub20_ADC_Config.Num_Chans);
                        std::cout << "          ADC Channels Selected           : " << ADC_MUXCONFIG << std::endl;
                        OneSub20Configuration.bSubDevConfigured = true;

                        //string needs to be cleared otherwise conversion is going wrong
                        strSerial.clear();
                        strSerial.resize(sub20_ADC_cmd::uSERIALNUMLENGTH);
                        sub_get_serial_number(sub20handle, const_cast<char*>(strSerial.c_str()), strSerial.size());
                        OneSub20Configuration.strSub20Serial    = strSerial;
                        OneSub20Configuration.handle_subdev     = sub20handle;
                        OneSub20Configuration.subdev            = sub20dev;
                        std::cout << "Device Handle   : " << OneSub20Configuration.handle_subdev << std::endl;
                        std::cout << "Serial Number   : " << OneSub20Configuration.strSub20Serial << std::endl;

                        // Push element onto list of subdevices
                        Sub20Device_list.push_back (OneSub20Configuration);
                        std::cout << "Serial : " << OneSub20Configuration.strSub20Serial << "\n";
                } else {
                        ROS_INFO("ERROR - Configuration : %d not accepted by device", iADC_cfg_set);
                        //Subdevice could not be configured
                        OneSub20Configuration.bSubDevConfigured = false;
                }
            }
            //find next device, sub_find_devices using current provides next
            sub20dev = sub_find_devices(sub20dev);
        }
        ROS_INFO("--------------------------------------");
        std::cout << "  ************* Publishing to rostopic - /sub20_ADC *************  " << std::endl;
}

Sub20_ADC::~Sub20_ADC() {
        // TODO Auto-generated destructor stub
        int iSpiErr;
        OneSub20Config OneSub20Configuration;
        //close opened subdevices
        // Disable SPI
        iSpiErr = sub_spi_config( subhndl, 0, 0 );
        // Close USB device
        sub_close( subhndl );
        while (!Sub20Device_list.empty()) {
                OneSub20Configuration = Sub20Device_list.back ();
                std::cout << "Sub device removed " << OneSub20Configuration.strSub20Serial << "\n";
                Sub20Device_list.pop_back ();
        }
}

// Map the string input to enum ADC channel types
void Sub20_ADC::initADC_MUX_MAP(){
        sub20_ADC_cmd::adcMuxMap["ADC_S0"] = ADC_S0;
        sub20_ADC_cmd::adcMuxMap["ADC_S1"] = ADC_S1;
        sub20_ADC_cmd::adcMuxMap["ADC_S2"] = ADC_S2;
        sub20_ADC_cmd::adcMuxMap["ADC_S3"] = ADC_S3;
        sub20_ADC_cmd::adcMuxMap["ADC_S4"] = ADC_S4;
        sub20_ADC_cmd::adcMuxMap["ADC_S5"] = ADC_S5;
        sub20_ADC_cmd::adcMuxMap["ADC_S6"] = ADC_S6;
        sub20_ADC_cmd::adcMuxMap["ADC_S7"] = ADC_S7;

        sub20_ADC_cmd::adcMuxMap["ADC_D10_10X"] = ADC_D10_10X;
        sub20_ADC_cmd::adcMuxMap["ADC_D10_200X"] = ADC_D10_200X;
        sub20_ADC_cmd::adcMuxMap["ADC_D32_10X"] = ADC_D32_10X;
        sub20_ADC_cmd::adcMuxMap["ADC_D32_200X"] = ADC_D32_200X;

        sub20_ADC_cmd::adcMuxMap["ADC_D01"] = ADC_D01;
        sub20_ADC_cmd::adcMuxMap["ADC_D21"] = ADC_D21;
        sub20_ADC_cmd::adcMuxMap["ADC_D31"] = ADC_D31;
        sub20_ADC_cmd::adcMuxMap["ADC_D41"] = ADC_D41;
        sub20_ADC_cmd::adcMuxMap["ADC_D51"] = ADC_D51;
        sub20_ADC_cmd::adcMuxMap["ADC_D61"] = ADC_D61;
        sub20_ADC_cmd::adcMuxMap["ADC_D71"] = ADC_D71;
        sub20_ADC_cmd::adcMuxMap["ADC_D02"] = ADC_D02;
        sub20_ADC_cmd::adcMuxMap["ADC_D12"] = ADC_D12;
        sub20_ADC_cmd::adcMuxMap["ADC_D32"] = ADC_D32;
        sub20_ADC_cmd::adcMuxMap["ADC_D42"] = ADC_D42;
        sub20_ADC_cmd::adcMuxMap["ADC_D52"] = ADC_D52;

        sub20_ADC_cmd::adcMuxMap["ADC_1_1V"] = ADC_1_1V;
        sub20_ADC_cmd::adcMuxMap["ADC_GND"] = ADC_GND;
}

// Get the Mux Code to output the channels being used for ADC
void Sub20_ADC::get_ADC_MuxCode(std::string ADC_MUXCONFIG, int *adc_mux, int *adc_type, int *channels) {

        unsigned int i=0, j=0, numVal=0;
        size_t charLocn[sub20_ADC_cmd::iMAXNUM_OF_CHANNELS], found;
        std::string ADCMux_Cfg[sub20_ADC_cmd::iMAXNUM_OF_CHANNELS], tmpStr;

        size_t strlen = ADC_MUXCONFIG.length();

        charLocn[0] = ADC_MUXCONFIG.find("|");
        if(charLocn[0] != std::string::npos){
                ADCMux_Cfg[0] = ADC_MUXCONFIG.substr(0,charLocn[0]);
                adc_mux[j] = sub20_ADC_cmd::adcMuxMap[ADCMux_Cfg[0]];

                tmpStr = ADCMux_Cfg[0];
                found = tmpStr.find("S");
                if(found != std::string::npos) {
                        adc_type[j] = 0;
                } else {
                        found = tmpStr.find("D");
                        if(found != std::string::npos){
                                adc_type[j] = 1;
                        } else {
                                adc_type[j] = 2;
                        }
                }
                j++;    numVal++;
        }
        for(i=1; i<strlen; i++){
                charLocn[i] = ADC_MUXCONFIG.find("|",(charLocn[i-1]+1));
                if(charLocn[i] == std::string::npos){
                        break;
                }
                ADCMux_Cfg[i] = ADC_MUXCONFIG.substr((charLocn[i-1]+1),((charLocn[i]-charLocn[i-1])-1));
                adc_mux[j] = sub20_ADC_cmd::adcMuxMap[ADCMux_Cfg[i]];

                tmpStr = ADCMux_Cfg[i];
                found = tmpStr.find("S");
                if(found != std::string::npos) {
                        adc_type[j] = 0;
                } else {
                        found = tmpStr.find("D");
                        if(found != std::string::npos){
                                adc_type[j] = 1;
                        } else {
                                adc_type[j] = 2;
                        }
                }
                j++;    numVal++;
        }
        *channels = numVal;
}

double Sub20_ADC::adc_To_Volts(int rawData, char convType, int muxCode, double dVRef){
        double value = 0, gain = 0;
        // convert adc to volts using 10-bit ADC and desired configuration
        // 'gains' are from the sub20-manual
        switch(convType){
                case 0:
                        value = (rawData*dVRef)/1023;
                        break;
                case 1:
                        if((muxCode==ADC_D10_10X)||(muxCode==ADC_D32_10X)){
                                gain = 10;
                        } else if((muxCode==ADC_D10_200X)||(muxCode==ADC_D32_200X)){
                                gain = 200;
                        } else {
                                gain = 1;
                        }
                        value = (rawData*dVRef)/(512*gain);
                        break;
                case 2:
                        value = rawData;
                        break;
                default:
                        break;
        }
        return value;
}

void Sub20_ADC::GetMeasurements(std::list<OneSub20_ADC_Meas> &list_meas, double dVRef, int *channels) {

        int                                    iADCErr;
        OneSub20_ADC_Meas                      sMeas;
        ros::Time                              dtomeas;
        std::stringstream                      ss_errmsg;
        std::list<OneSub20Config>::iterator    iterat;
        int                                    sub20_ADC_BUF[16];       // Buffer for ADC Channels
        int                                    adc_buf, adc_mux;
        int                                    Num_Chans;

        //verify that a subdevice is connected
        if (1 > (int)Sub20Device_list.size()) {
                throw std::string ("No SubDevice connected OR access rights to USB not given");
        }


        //Trace sub20 list
        for (iterat = Sub20Device_list.begin(); iterat != Sub20Device_list.end(); iterat++ ) {
                //verify if the sub20 device is configured (which should be the case as only configured sub20ies are pushed on list)
                if (iterat->bSubDevConfigured == true) {
                        Num_Chans = iterat->sub20_ADC_Config.Num_Chans;
//                      iADCErr = sub_adc_read(iterat->handle_subdev, sub20_ADC_BUF, iterat->sub20_ADC_Config.sub20_ADC_MUX, Num_Chans);
//                      if(iADCErr == 0){
                                sMeas.bMeasAvailable = true;
                                for (int i=0; i<Num_Chans; i++){
                                        adc_mux = iterat->sub20_ADC_Config.sub20_ADC_MUX[i];
                                        iADCErr = sub_adc_single(iterat->handle_subdev, &adc_buf, adc_mux);
                                        sub20_ADC_BUF[i] = adc_buf;
                                        if(iADCErr == 0){
                                              sMeas.uiADCRaw[i] = sub20_ADC_BUF[i];
                                              sMeas.fADCVolt[i] = adc_To_Volts(sub20_ADC_BUF[i], iterat->sub20_ADC_Config.sub20_ADC_TYPE[i], iterat->sub20_ADC_Config.sub20_ADC_MUX[i], dVRef);
                                        } else {
                                              sMeas.bMeasAvailable = true;
                                              throw std::string ("Error on ADC conversion - Unplug or reset Sub20 Device");
                                        }
                                }
                                sMeas.dtomeas   = ros::Time::now();
                                sMeas.strSerial = iterat->strSub20Serial;
                                // Push measurement onto heap once all available channels are read!
                                list_meas.push_back (sMeas);
//                      } else {
//                              throw std::string ("Error on ADC conversion - Unplug or reset Sub20 Device");
//                      }
                } else {
                        throw std::string ("SUB20 connected but not configured - Restart of node suggested");
                }
        }
        *channels = Num_Chans;
}

// ----------
// -- MAIN --
// ----------
int main(int argc, char **argv) {
        //---------------------------------------------
        // Declarations
        //---------------------------------------------
        //General definitions
        int                             count = 1;
        //Publisher for sub20_ADC data
        ros::init(argc, argv, "adc_sub20");
        ros::NodeHandle n;
        ros::Publisher sub20_ADC_pub = n.advertise<adc_sub20::sub20_ADC_meas>("adc_sub20", 100);
        //Parameter Server values
        double                  dRate_Hz;
        double                  dVRef;
        int                     Num_Chans;

        std::string             ADC_MUXCONFIG;

        //---------------------------------------------
        // Read initialization parameters from server
        //---------------------------------------------
        //Read parameters from server - if parameters are not available, the node
        //is initialized with default
        if (n.getParam("/adc_sub20/ADC_MUX_CONFIG", ADC_MUXCONFIG)         == false ) {
                ADC_MUXCONFIG = sub20_ADC_cmd::sDEFAULT_ADC_MUXCONFIG;
        };
        if (n.getParam("/adc_sub20/rate_Hz", dRate_Hz)                   == false ) {
                dRate_Hz = sub20_ADC_cmd::dDEFAULT_RATE_Hz;
        };
        if (n.getParam("/adc_sub20/VoltRef", dVRef)               == false ) {
                dVRef = sub20_ADC_cmd::dDEFAULT_VOLTREF;
        };

        Sub20_ADC                       sub20_ADC_attached(ADC_MUXCONFIG, dRate_Hz, dVRef);
        OneSub20_ADC_Meas               sOneMeas;
        adc_sub20::sub20_ADC_meas       msg;
        std::list<OneSub20_ADC_Meas>    measurements_list;

        // Run sensor node
        //set loop rate for measurement polling
        ros::Rate loop_rate(dRate_Hz);

        while (n.ok()) {
                //initiate a measurement on ADC
                try {
                  sub20_ADC_attached.GetMeasurements(measurements_list, dVRef, &Num_Chans);
                }
                catch ( std::string strType ) {
                        std::cout << " An exception occurred: " << strType << std::endl;
                        std::exit(1);
                }

                while (!measurements_list.empty()) {
                        sOneMeas = measurements_list.back ();
                        measurements_list.pop_back ();
                        //only publish if a successful measurement was received
                        if ( sOneMeas.bMeasAvailable == true ) {
                                msg.strIdSubDev         = sOneMeas.strSerial;

                                // collect all available channel values into one message
                                for(int i=0; i<Num_Chans; i++){
                                        msg.uiRaw.push_back(sOneMeas.uiADCRaw[i]);
                                        msg.fVolts.push_back(sOneMeas.fADCVolt[i]);
                                }
                                msg.header.stamp        = sOneMeas.dtomeas;
                                sub20_ADC_pub.publish(msg);         // publish to topic!

                                // clear the message values after publishing to avoid accumulation of further values on subsequent messages.
                                msg.uiRaw.clear();
                                msg.fVolts.clear();
                        }
                }
                ros::spinOnce();
                loop_rate.sleep();
                ++count;
        }
}

---

adc_sub20
Author(s): Nikhil Deshpande (Maintained by Philip Roan)
autogenerated on Sun Mar 3 11:09:03 2013