multi_interface_roam: flags.py Source File

00001 # -*- coding: latin1 -*-
00002 # Python WiFi -- a library to access wireless card properties via Python
00003 # Copyright (C) 2004 - 2008 R�man Joost
00004 # Copyright (C) 2008 - 2009 Sean Robinson
00005 #
00006 #    This library is free software; you can redistribute it and/or
00007 #    modify it under the terms of the GNU Lesser General Public License
00008 #    as published by the Free Software Foundation; either version 2.1 of
00009 #    the License, or (at your option) any later version.
00010 #
00011 #    This library is distributed in the hope that it will be useful, but
00012 #    WITHOUT ANY WARRANTY; without even the implied warranty of
00013 #    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
00014 #    Lesser General Public License for more details.
00015 #
00016 #    You should have received a copy of the GNU Lesser General Public
00017 #    License along with this library; if not, write to the Free Software
00018 #    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
00019 #    USA
00020 
00021 modes = ['Auto',
00022          'Ad-Hoc',
00023          'Managed',
00024          'Master',
00025          'Repeat',
00026          'Second',
00027          'Monitor',
00028          'Unknown/bug']
00029 
00030 IFNAMSIZE = 16
00031 IW_ESSID_MAX_SIZE = 32
00032 IW_MAX_FREQUENCIES = 32
00033 IW_MAX_BITRATES = 32
00034 IW_MAX_TXPOWER = 8
00035 
00036 SIOCGIFCONF   = 0x8912    # ifconf struct
00037 
00038 # ioctl calls for the Linux/i386 kernel
00039 SIOCSIWCOMMIT    = 0x8B00    # Commit pending changes to driver
00040 SIOCGIWNAME      = 0x8B01    # get name == wireless protocol
00041 SIOCSIWNWID      = 0x8B02    # set network id (pre-802.11)
00042 SIOCGIWNWID      = 0x8B03    # get network id (the cell)
00043 SIOCSIWFREQ      = 0x8B04    # set channel/frequency
00044 SIOCGIWFREQ      = 0x8B05    # get channel/frequency
00045 SIOCSIWMODE      = 0x8B06    # set the operation mode
00046 SIOCGIWMODE      = 0x8B07    # get operation mode
00047 SIOCSIWSENS      = 0x8B08    # set sensitivity (dBm)
00048 SIOCGIWSENS      = 0x8B09    # get sensitivity
00049 SIOCSIWRANGE     = 0x8B0A    # Unused
00050 SIOCGIWRANGE     = 0x8B0B    # Get range of parameters
00051 SIOCSIWPRIV      = 0x8B0C    # Unused
00052 SIOCGIWPRIV      = 0x8B0D    # get private ioctl interface info
00053 SIOCSIWSTATS     = 0x8B0E    # Unused
00054 SIOCGIWSTATS     = 0x8B0F    # Get /proc/net/wireless stats
00055 SIOCSIWSPY       = 0x8B10    # set spy addresses
00056 SIOCGIWSPY       = 0x8B11    # get spy info (quality of link)
00057 SIOCSIWTHRSPY    = 0x8B12    # set spy threshold (spy event)
00058 SIOCGIWTHRSPY    = 0x8B13    # get spy threshold
00059 SIOCSIWAP        = 0x8B14    # set AP MAC address
00060 SIOCGIWAP        = 0x8B15    # get AP MAC addresss
00061 SIOCGIWAPLIST    = 0x8B17    # Deprecated in favor of scanning
00062 SIOCSIWSCAN      = 0x8B18    # set scanning off
00063 SIOCGIWSCAN      = 0x8B19    # get scanning results
00064 SIOCSIWESSID     = 0x8B1A    # set essid
00065 SIOCGIWESSID     = 0x8B1B    # get essid
00066 SIOCSIWNICKN     = 0x8B1C    # set node name/nickname
00067 SIOCGIWNICKN     = 0x8B1D    # get node name/nickname
00068 SIOCSIWRATE      = 0x8B20    # set default bit rate (bps)
00069 SIOCGIWRATE      = 0x8B21    # get default bit rate (bps)
00070 SIOCSIWRTS       = 0x8B22    # set RTS/CTS threshold (bytes)
00071 SIOCGIWRTS       = 0x8B23    # get RTS/CTS threshold (bytes)
00072 SIOCSIWFRAG      = 0x8B24    # set fragmentation thr (bytes)
00073 SIOCGIWFRAG      = 0x8B25    # get fragmentation thr (bytes)
00074 SIOCSIWTXPOW     = 0x8B26    # set transmit power (dBm)
00075 SIOCGIWTXPOW     = 0x8B27    # get transmit power (dBm)
00076 SIOCSIWRETRY     = 0x8B28    # set retry limits and lifetime
00077 SIOCGIWRETRY     = 0x8B29    # get retry limits and lifetime
00078 SIOCSIWENCODE    = 0x8B2A    # set encryption information
00079 SIOCGIWENCODE    = 0x8B2B    # get encryption information
00080 SIOCSIWPOWER     = 0x8B2C    # set Power Management settings
00081 SIOCGIWPOWER     = 0x8B2D    # get power managment settings
00082 SIOCSIWMODUL     = 0x8B2E    # set Modulations settings
00083 SIOCGIWMODUL     = 0x8B2F    # get Modulations settings
00084 SIOCSIWGENIE     = 0x8B30    # set generic IE
00085 SIOCGIWGENIE     = 0x8B31    # get generic IE
00086 # WPA
00087 SIOCSIWMLME      = 0x8B16    # request MLME operation; uses struct iw_mlme
00088 SIOCSIWAUTH      = 0x8B32    # set authentication mode params
00089 SIOCGIWAUTH      = 0x8B33    # get authentication mode params
00090 SIOCSIWENCODEEXT = 0x8B34    # set encoding token & mode
00091 SIOCGIWENCODEEXT = 0x8B35    # get encoding token & mode
00092 SIOCSIWPMKSA     = 0x8B36    # PMKSA cache operation
00093 
00094 SIOCIWFIRST = 0x8B00    # FIRST ioctl identifier
00095 SIOCIWLAST  = 0x8BFF    # LAST ioctl identifier
00096 
00097 # Wireless events
00098 IWEVFIRST             = 0x8C00    # FIRST event identifier
00099 IWEVTXDROP            = 0x8C00    # Packet dropped to excessive retry
00100 IWEVQUAL              = 0x8C01    # Quality statistics from scan
00101 IWEVCUSTOM            = 0x8C02    # Custom Ascii string from Driver
00102 IWEVREGISTERED        = 0x8C03    # Discovered a new node (AP mode)
00103 IWEVEXPIRED           = 0x8C04    # Expired a node (AP mode)
00104 IWEVGENIE             = 0x8C05    # Generic IE (WPA, RSN, WMM, ..)
00105 IWEVMICHAELMICFAILURE = 0x8C06    # Michael MIC failure
00106 IWEVASSOCREQIE        = 0x8C07    # IEs used in (Re)Association Request.
00107 IWEVASSOCRESPIE       = 0x8C08    # IEs used in (Re)Association Response.
00108 IWEVPMKIDCAND         = 0x8C09    # PMKID candidate for RSN pre-authentication
00109 IWEVLAST              = 0x8C0A    # LAST event identifier
00110 
00111 # Power management flags
00112 IW_POWER_ON          = 0x0000  # No details ...
00113 IW_POWER_TYPE        = 0xF000  # Type of parameter
00114 IW_POWER_PERIOD      = 0x1000  # Value is a period/duration of
00115 IW_POWER_TIMEOUT     = 0x2000  # Value is a timeout
00116 IW_POWER_SAVING      = 0x4000  # Value is relative (how aggressive)
00117 IW_POWER_MODE        = 0x0F00  # Power management mode
00118 IW_POWER_UNICAST_R   = 0x0100  # Receive only unicast messages
00119 IW_POWER_MULTICAST_R = 0x0200  # Receive only multicast messages
00120 IW_POWER_ALL_R       = 0x0300  # Receive all messages though PM
00121 IW_POWER_FORCE_S     = 0x0400  # Force PM procedure for sending unicast
00122 IW_POWER_REPEATER    = 0x0800  # Repeat broadcast messages in PM period
00123 IW_POWER_MODIFIER    = 0x000F  # Modify a parameter
00124 IW_POWER_MIN         = 0x0001  # Value is a minimum
00125 IW_POWER_MAX         = 0x0002  # Value is a maximum
00126 IW_POWER_RELATIVE    = 0x0004  # Value is not in seconds/ms/us
00127 
00128 # Retry limits and lifetime flags available
00129 IW_RETRY_ON       = 0x0000  # No details...
00130 IW_RETRY_TYPE     = 0xF000  # Type of parameter
00131 IW_RETRY_LIMIT    = 0x1000  # Maximum number of retries
00132 IW_RETRY_LIFETIME = 0x2000  # Maximum duration of retries in us
00133 IW_RETRY_MODIFIER = 0x00FF  # Modify a parameter
00134 IW_RETRY_MIN      = 0x0001  # Value is a minimum
00135 IW_RETRY_MAX      = 0x0002  # Value is a maximum
00136 IW_RETRY_RELATIVE = 0x0004  # Value is not in seconds/ms/us
00137 IW_RETRY_SHORT    = 0x0010  # Value is for short packets
00138 IW_RETRY_LONG     = 0x0020  # Value is for long packets
00139 
00140 # Modes of operation
00141 IW_MODE_AUTO    = 0   # Let the driver decides
00142 IW_MODE_ADHOC   = 1   # Single cell network
00143 IW_MODE_INFRA   = 2   # Multi cell network, roaming, ...
00144 IW_MODE_MASTER  = 3   # Synchronisation master or Access Point
00145 IW_MODE_REPEAT  = 4   # Wireless Repeater (forwarder)
00146 IW_MODE_SECOND  = 5   # Secondary master/repeater (backup)
00147 IW_MODE_MONITOR = 6   # Passive monitor (listen only)
00148 
00149 # Statistics flags (bitmask in updated)
00150 IW_QUAL_QUAL_UPDATED  = 0x01   # Value was updated since last read
00151 IW_QUAL_LEVEL_UPDATED = 0x02
00152 IW_QUAL_NOISE_UPDATED = 0x04
00153 IW_QUAL_ALL_UPDATED   = 0x07
00154 IW_QUAL_DBM           = 0x08   # Level + Noise are dBm
00155 IW_QUAL_QUAL_INVALID  = 0x10   # Driver doesn't provide value
00156 IW_QUAL_LEVEL_INVALID = 0x20
00157 IW_QUAL_NOISE_INVALID = 0x40
00158 IW_QUAL_RCPI          = 0x80   # Level + Noise are 802.11k RCPI
00159 IW_QUAL_ALL_INVALID   = 0x70
00160 
00161 # Frequency flags
00162 IW_FREQ_AUTO = 0x00       # Let the driver decide
00163 IW_FREQ_FIXED = 0x01      # Force a specific value
00164 
00165 # Maximum number of size of encoding token available
00166 IW_MAX_ENCODING_SIZES = 8
00167 
00168 # Maximum size of the encoding token in bytes
00169 IW_ENCODING_TOKEN_MAX = 64       # 512 bits (for now)
00170 
00171 # Flags for encoding (along with the token)
00172 IW_ENCODE_INDEX       = 0x00FF   # Token index (if needed)
00173 IW_ENCODE_FLAGS       = 0xFF00   # Flags defined below
00174 IW_ENCODE_MODE        = 0xF000   # Modes defined below
00175 IW_ENCODE_DISABLED    = 0x8000   # Encoding disabled
00176 IW_ENCODE_ENABLED     = 0x0000   # Encoding enabled
00177 IW_ENCODE_RESTRICTED  = 0x4000   # Refuse non-encoded packets
00178 IW_ENCODE_OPEN        = 0x2000   # Accept non-encoded packets
00179 IW_ENCODE_NOKEY       = 0x0800   # Key is write only, so not present
00180 IW_ENCODE_TEMP        = 0x0400   # Temporary key
00181 
00182 # MAC address length
00183 ETH_ALEN = 6
00184 
00185 # constants responsible for scanning
00186 IW_SCAN_MAX_DATA = 4096
00187 
00188 # event sizes
00189 IW_EV_LCP_LEN = 4
00190 IW_EV_CHAR_LEN = IW_EV_LCP_LEN + IFNAMSIZE
00191 IW_EV_UINT_LEN = IW_EV_LCP_LEN + 4
00192 IW_EV_FREQ_LEN = IW_EV_LCP_LEN + 8
00193 IW_EV_ADDR_LEN = IW_EV_LCP_LEN + 16
00194 IW_EV_POINT_LEN = IW_EV_LCP_LEN + 4
00195 IW_EV_PARAM_LEN = IW_EV_LCP_LEN + 8
00196 IW_EV_QUAL_LEN = IW_EV_LCP_LEN + 4
00197 
00198 IW_EV_LCP_PK_LEN = 4
00199 
00200 IWHT_NULL = 0
00201 IWHT_CHAR = 2
00202 IWHT_UINT = 4
00203 IWHT_FREQ = 5
00204 IWHT_ADDR = 6
00205 IWHT_POINT = 8
00206 IWHT_PARAM = 9
00207 IWHT_QUAL = 10
00208