$search

bma180-writer.cpp

Go to the documentation of this file.

/* -------------------------------------------------------------------------- */
// BMA180 Spi Communication Node (Mux+Counter)
//
//    - Reads from 8 BMA 180's with specified kHz Sampling frequency
//    - Writes message to shared memory with accel data
//
//  created by: Sebastian Haug 2010 | Robert Bosch RTC
//  edited by : Nikhil Deshpande 2011 | Robert Bosch RTC
/* -------------------------------------------------------------------------- */

// Includes
/* -------------------------------------------------------------------------- */
#include <sstream>
#include <iostream>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <fcntl.h>
#include <ctime>
#include <unistd.h>
#include <sys/ioctl.h>
#include <sys/time.h>
#include <sys/types.h>
#include <sys/ipc.h>
#include <sys/shm.h>
#include <linux/spi/spidev.h>
#include <sched.h>
#include <ros/ros.h>
#include <std_msgs/String.h>
#include <gumstix_memwrite_bma180/writermsg.h>
#include <errno.h>

using namespace std;


// Macros, Defines
/* -------------------------------------------------------------------------- */
#define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0]))
#define NUM_SENSORS 8 
#define SHMSZ   30720000        
#define xSHMSZ  0x1D4C000  // hex converted

// Configuration
/* -------------------------------------------------------------------------- */
static const char *device0      = "/dev/spidev1.1";
static uint8_t mode             = SPI_MODE_3;
static uint8_t bits             = 8;
static uint32_t speed           = 6000000;
static uint16_t delay           = 0; //in us


// Static helper functions
/* -------------------------------------------------------------------------- */
static void pabort(const char *s) {
        perror(s);
        abort();
}

static void conv_device(int ret, int fd) {
        // Spi mode
        ret = ioctl(fd, SPI_IOC_WR_MODE, &mode);
        if (ret == -1)
                pabort("can't set spi mode");

        ret = ioctl(fd, SPI_IOC_RD_MODE, &mode);
        if (ret == -1)
                pabort("can't get spi mode");

        // Bits per word
        ret = ioctl(fd, SPI_IOC_WR_BITS_PER_WORD, &bits);
        if (ret == -1)
                pabort("can't set bits per word");

        ret = ioctl(fd, SPI_IOC_RD_BITS_PER_WORD, &bits);
        if (ret == -1)
                pabort("can't get bits per word");

        // Max speed hz
        ret = ioctl(fd, SPI_IOC_WR_MAX_SPEED_HZ, &speed);
        if (ret == -1)
                pabort("can't set max speed hz");

        ret = ioctl(fd, SPI_IOC_RD_MAX_SPEED_HZ, &speed);
        if (ret == -1)
                pabort("can't get max speed hz");

        printf("spi mode: %d\n", mode);
        printf("bits per word: %d\n", bits);
        printf("max speed: %d Hz (%d MHz)\n", speed, speed / 1000000);
}

int16_t reint_as_2c(char chMSB, char chLSB)
{
        // Reinterprets unsigned integer as 7 bit two's complement number and returns signed integer
        int16_t         s16int;                 //2 byte int to build message
        //verify if pos or neg
        if ( (chMSB & 0x80) == 0 ) {
                //positive number
                s16int = (int16_t) ((((uint16_t)chMSB)&0xFF)<<6) + ((((uint16_t)chLSB)&0xFC)>>2);
        }
        else {
                //negative number
                //set MSB (sign) to zero and build 2 complement unsigned; offset 8192 for 2^13
                s16int = (int16_t) (((((uint16_t)chMSB)&0x7F)<<6) + ((((uint16_t)chLSB)&0xFC)>>2) - 8192);
        }

        return s16int;
}

int udelay (unsigned int usecs) {
        struct timeval StartTime, EndTime, CurrentTime, delay_r;
        delay_r.tv_sec = 0;
        delay_r.tv_usec = usecs;
        gettimeofday(&StartTime, NULL);
        timeradd(&StartTime, &delay_r, &EndTime);
        //cout << "usecs: " << usecs << endl;
        //if usecs > 10000, then usleep works well using fewer resources
        if (usecs >= 10000) {
                usleep(usecs);
                return 1;
        }
        // if usecs < 10000, use tighter loop...
        do {
                gettimeofday(&CurrentTime, NULL);
        } while (timercmp(&CurrentTime, &EndTime, <));
        return 1;
}

// Main
/* -------------------------------------------------------------------------- */
int main(int argc, char** argv) {
        struct sched_param prmtr;
        prmtr.sched_priority = 99;
        sched_setscheduler(0,SCHED_FIFO,&prmtr);

        // Ros
        ros::init(argc, argv, "gumstix_memwrite_bma180");
        ros::NodeHandle n;
        ros::Publisher pub = n.advertise<gumstix_memwrite_bma180::writermsg> ("writermsg", 10); 
        gumstix_memwrite_bma180::writermsg msg;

        double rate_Hz;
        int duration;
        // Initialize members
        int ret = 0, fd0;

        // Open SPI device 0
        fd0 = open(device0, O_RDWR);
        if (fd0 < 0)
                pabort("can't open device");
        conv_device(ret, fd0);

        // get Parameters
        if (n.getParam("/gumstix_memwrite_bma180/rate_Hz", rate_Hz)==false) {
                rate_Hz = 1200;
        }
        if (n.getParam("/gumstix_memwrite_bma180/duration", duration)==false) {
                duration = 2;
        }

        // Initialize measurement buffer
        /* -------------------------------------------------------------------------- */
        // Init tx buffer
        uint8_t tx_meas[] = {0x82, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80};
        //                   addr, xlsb, xmsb, ylsb, ymsb, zlsb, zmsb

        // Init rx buffer
        char rx_meas[ARRAY_SIZE(tx_meas)] = {0};
        int16_t valAvail[NUM_SENSORS][3];
        int16_t valAccel[NUM_SENSORS][3];
        long i=0, k=0, msgs_not_logged=0, msgs_undersampled=0;
        uint64_t j=0;
        long int num_msgs_sampled=1;

        // Prepare spi message for acceleration measurement
        struct spi_ioc_transfer tr_acc;
        tr_acc.tx_buf                   = (unsigned long) tx_meas;
        tr_acc.rx_buf                   = (unsigned long) rx_meas;
        tr_acc.len                      = ARRAY_SIZE(tx_meas);
        tr_acc.delay_usecs              = delay;
        tr_acc.speed_hz                 = speed;
        tr_acc.bits_per_word            = bits;
        tr_acc.cs_change                = true;
        /* -------------------------------------------------------------------------- */

        // Initialize Shared Memory
        int16_t *shm, *s, shmid;
        key_t key = 42;
        if ((shmid = shmget(key, SHMSZ, IPC_CREAT | 0666)) < 0) {
            if(errno == EINVAL)
                printf("Invalid segment size specified\n");
            else if(errno == EEXIST)
                printf("Segment exists, cannot create it\n");
            else if(errno == EIDRM)
                printf("Segment is marked for deletion or was removed\n");
            else if(errno == ENOENT)
                printf("Segment does not exist\n");
            else if(errno == EACCES)
                printf("Permission denied\n");
            else if(errno == ENOMEM)
                printf("Not enough memory to create segment\n");

        }
        if ((shm = (int16_t *) shmat(shmid, NULL, 0)) == (int16_t *) -1) {
                cerr << "shmat did not work! " << shm << endl;
        }
        s = shm;
        s++;
        *shm = 10001;
        cout << "Begin memory <writer> : " << s << endl;
        // Rate object
        //ros::Rate loop_rate(rate_Hz);
        cout << "Sampling rate: " << rate_Hz << " Hz" << endl;
        cout << "Sampling duration: " << duration << " seconds" << endl;

        struct timeval start_t, curr_t, endLoop, loop_t, beforeProc, afterProc, delay_t;
        unsigned int delVal = ((unsigned int)(1000000/rate_Hz)); 
        long int rem_time;

        // Main loop
        // specify data logging duration in seconds...
        bool doOnce=true;
        int pubThresh=100*duration;
        loop_t.tv_sec = duration;       loop_t.tv_usec = 0;
        gettimeofday(&start_t, NULL);
        timeradd(&start_t, &loop_t, &endLoop);
        do {
                gettimeofday(&beforeProc, NULL);
                // Transfer/receive messages
                for (i = 0; i < NUM_SENSORS; i++) {
                        if(s>=(shm + xSHMSZ)){
                                s = shm;
                                s++;
                        }
                        // Do Transfer
                        ret = ioctl(fd0, SPI_IOC_MESSAGE(1), &tr_acc);          // get accel

                        // Extract new data bit
                        valAvail[i][0] = rx_meas[1] & 0x1;      // new x
                        valAvail[i][1] = rx_meas[3] & 0x1;      // new y
                        valAvail[i][2] = rx_meas[5] & 0x1;      // new z

                        // Extract and convert acceleration values
                        valAccel[i][0] = reint_as_2c(rx_meas[2], rx_meas[1]);   // acc x
                        valAccel[i][1] = reint_as_2c(rx_meas[4], rx_meas[3]);   // acc y
                        valAccel[i][2] = reint_as_2c(rx_meas[6], rx_meas[5]);   // acc z
                        for (k=0; k<3 ;k++) {
                                *(s++) = valAvail[i][k];
                                if(s>=(shm + xSHMSZ)){
                                        s = shm;
                                        s++;
                                }
                                j++;
                        }
                        for (k=0; k<3; k++) {
                                *(s++) = valAccel[i][k]; 
                                if(s>=(shm + xSHMSZ)){
                                        s = shm;
                                        s++;
                                }
                                j++;
                        }
                }
                if(num_msgs_sampled>=pubThresh){
                        msg.written = true;
                        if(doOnce){
                                doOnce = false;
                                pub.publish(msg);
                                ros::spinOnce();
                        }
                } else {
                        msg.written = false;
                }
                num_msgs_sampled++;
                gettimeofday(&afterProc, NULL);
                timersub(&afterProc, &beforeProc, &delay_t);
                rem_time = delVal - ((delay_t.tv_sec*1000000) + delay_t.tv_usec);
                //cout << "Process time: " << delay_t.tv_usec << " Delay: " << rem_time << endl;
                if(rem_time>0) {
                        udelay(rem_time);
                } else {
                        //cout << " ** Process delay longer than desired Loop rate: " << rem_time << endl;
                        msgs_undersampled++;// = num_msgs_sampled;
                }
                gettimeofday(&curr_t, NULL);
                //cout << "Loop Time: " << curr_t.tv_usec << endl;
                //cout << curr_t.tv_sec << " <compare> " << endLoop.tv_sec << endl;
        } while(timercmp(&curr_t, &endLoop, <));
        // Close spi devices
        close(fd0);
        *shm = -112;
        cout << "Done writing..." << endl;
        cout << "Values stored: " << j << endl;
        cout << "Msgs sampled: " << num_msgs_sampled << endl;
//      while(*shm != (j+1)){
//              udelay(6500);
//      }
        cout << "End memory <writer> : " << s << endl; 
//      msg.written = false;
//      pub.publish(msg);
        exit(0);
}

---

gumstix_memwrite_bma180
Author(s): Nikhil Deshpande (Maintained by Philip Roan)
autogenerated on Sun Mar 3 11:09:10 2013