spacenav_node.cpp

Go to the documentation of this file.

/*
 * Copyright (c) 2008, Willow Garage, Inc.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 *     * Redistributions of source code must retain the above copyright
 *       notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright
 *       notice, this list of conditions and the following disclaimer in the
 *       documentation and/or other materials provided with the distribution.
 *     * Neither the name of the Willow Garage, Inc. nor the names of its
 *       contributors may be used to endorse or promote products derived from
 *       this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

/*
 * Author: Stuart Glaser
 */

#include <stdio.h>
#include "ros/node_handle.h"
#include "spnav.h"
#include "geometry_msgs/Vector3.h"
#include "geometry_msgs/Twist.h"
#include "joy/Joy.h"

#define FULL_SCALE (512.0)
//Used to scale joystick output to be in [-1, 1].  Estimated from data, and not necessarily correct.

int main(int argc, char **argv)
{
  ros::init(argc, argv, "spacenav");

  ros::NodeHandle node_handle;
  ros::Publisher offset_pub = node_handle.advertise<geometry_msgs::Vector3>("spacenav/offset", 2);
  ros::Publisher rot_offset_pub = node_handle.advertise<geometry_msgs::Vector3>("spacenav/rot_offset", 2);
  ros::Publisher twist_pub = node_handle.advertise<geometry_msgs::Twist>("spacenav/twist", 2);
  ros::Publisher joy_pub = node_handle.advertise<joy::Joy>("spacenav/joy", 2);

  if (spnav_open() == -1)
  {
    ROS_ERROR("Could not open the space navigator device.  Did you remember to run spacenavd (as root)?");

    return 1;
  }

  joy::Joy joystick_msg;
  joystick_msg.axes.resize(6);
  joystick_msg.buttons.resize(2);
  
  spnav_event sev;
  int no_motion_count = 0;
  bool motion_stale = false;
  geometry_msgs::Vector3 offset_msg;
  geometry_msgs::Vector3 rot_offset_msg;
  geometry_msgs::Twist twist_msg;
  while (node_handle.ok())
  {
    bool joy_stale = false;
    bool queue_empty = false;
    
    // Sleep when the queue is empty.
    // If the queue is empty 30 times in a row output zeros.
    // Output changes each time a button event happens, or when a motion
    // event happens and the queue is empty.

    switch (spnav_poll_event(&sev))
    {
      case 0:
        queue_empty = true;
        if (++no_motion_count > 30)
        {
          offset_msg.x = offset_msg.y = offset_msg.z = 0;
          rot_offset_msg.x = rot_offset_msg.y = rot_offset_msg.z = 0;

          no_motion_count = 0;
          motion_stale = true;
        }
        break;

      case SPNAV_EVENT_MOTION:
        offset_msg.x = sev.motion.z;
        offset_msg.y = -sev.motion.x;
        offset_msg.z = sev.motion.y;

        rot_offset_msg.x = sev.motion.rz;
        rot_offset_msg.y = -sev.motion.rx;
        rot_offset_msg.z = sev.motion.ry;

        //printf("%lf  %lf  %lf\n", rot_offset_msg.x, rot_offset_msg.y, rot_offset_msg.z);

        motion_stale = true;
        break;
        
      case SPNAV_EVENT_BUTTON:
        //printf("type, press, bnum = <%d, %d, %d>\n", sev.button.type, sev.button.press, sev.button.bnum);
        joystick_msg.buttons[sev.button.bnum] = sev.button.press;

        joy_stale = true;
        break;

      default:
        ROS_WARN("Unknown message type in spacenav. This should never happen.");
        break;
    }
  
    if (motion_stale && (queue_empty || joy_stale))
    {
      offset_pub.publish(offset_msg);
      rot_offset_pub.publish(rot_offset_msg);

      twist_msg.linear = offset_msg;
      twist_msg.angular = rot_offset_msg;
      twist_pub.publish(twist_msg);

      joystick_msg.axes[0] = offset_msg.x / FULL_SCALE;
      joystick_msg.axes[1] = offset_msg.y / FULL_SCALE;
      joystick_msg.axes[2] = offset_msg.z / FULL_SCALE;
      joystick_msg.axes[3] = rot_offset_msg.x / FULL_SCALE;
      joystick_msg.axes[4] = rot_offset_msg.y / FULL_SCALE;
      joystick_msg.axes[5] = rot_offset_msg.z / FULL_SCALE;

      no_motion_count = 0;
      motion_stale = false;
      joy_stale = true;
    }
  
    if (joy_stale)
    {
      joy_pub.publish(joystick_msg);
    }

    if (queue_empty)
      usleep(1000);
  }

  return 0;
}

---

spacenav_node
Author(s): Stuart Glaser, Blaise Gassend
autogenerated on Fri Jan 11 10:02:54 2013